Search results

  1. S

    1981 Springbok 18' Restoration/Renovation

    My apologies if this doesn’t work, only wanting to share these pictures before the overall timeline doesn’t make sense. Cutting, gluing, and sealing my wooden transom. https://tinypic.host/image/IMG-8317.DeoCH1 https://tinypic.host/image/IMG-8321.DeoGsG https://tinypic.host/image/IMG-8335.Deo5r6
  2. S

    '85 Sierra 16.5' Fiberglass - Floor / Transom / New Layout

    Completely unrelated from your work, how are you uploading images right now? I’ve been attempting through iboats with no success. How do I post images with imgur?
  3. S

    1981 Springbok 18' Restoration/Renovation

    Today I cut the aluminum sheet I had into an inner transom sheet, the wood will be sandwiched between this inner sheet and the outer sheet I have previously re-skinned. I used some leftover trimmings from it to make tabs that can be riveted to the hull around the edges. I’m currently welding...
  4. S

    1981 Springbok 18' Restoration/Renovation

    Still not able to upload pictures, I apologize in advance for the ridiculous amount of photos I’ll be posting when I can. I will attempt to comment on the previous posts with pictures of what I had written…
  5. S

    1981 Springbok 18' Restoration/Renovation

    Found a good quality SS316 from the local marina. Have the marine ply backing for it in clamps as we speak for the glue to cure and then I’ll get to cutting and fitting it properly.
  6. S

    1981 Springbok 18' Restoration/Renovation

    Looking at my options for replacing the bow eye on the hull as the previous one was bent and quite rusty. The holes are 1-5/8" apart and found the exact bow eye on amazon. It appears that it is made of a Zinc Alloy Steel and Chrome Plated, the old one clearly rusted for a reason as it seems it...
  7. S

    1981 Springbok 18' Restoration/Renovation

    Between applying sealer coats to the transom and being at work, i had some time yesterday to test the hull for leaks now that the largest hole, being the outdrive was covered and riveted in place. I filled the boat with enough water to be over the seams where the floor meets the sides. I ended...
  8. S

    1973 Starcraft SuperSport 16ft. restoration questions

    Been following along with your thread for as long as I've known about iboats, finally made an account to start logging the journey of my own restoration. You and the admiral have done a phenomenal job thus far and it's been extremely helpful for myself to plan out how I will attack my old...
  9. S

    Restoration project - 1965 AlumaCraft Maracaibo

    how did you go about removing all the paint? I'm in the progress of my own restoration and will have to remove some paint as well... not sure if ill just self etch prime the bare areas and paint over the previous paint with a good sanding or get the whole hull bare and start there. Struggling...
  10. S

    1981 Springbok 18' Restoration/Renovation

    The outer skin is now fully cured, and all the solid rivets have been installed and set. I went around the perimeter of the transom skin putting a rivet in every 1-1/2", it came out looking very good and im impressed with the strength it added to the transom. I installed the Z braces with rivets...
  11. S

    1981 Springbok 18' Restoration/Renovation

    Still not able to upload pictures, becoming rather frustrating but making good progress. I’ve got the outer skin epoxied onto the boat and fully cured, allowed it to sit a few days being clamped with the humidity we’ve been having and seems to be nearly impossible to ever remove. Started with...
  12. S

    1981 Springbok 18' Restoration/Renovation

    While I’ve been waiting to epoxy the skin on, I went and got a sheet of 3/4” ply to make the transom. Managed to make both pieces out of 1 sheet which was very nice. Currently letting the adhesive set between the two pieces while I’ve got it screwed and weighted down. What is the best way to...
  13. S

    1981 Springbok 18' Restoration/Renovation

    Finally able to upload photos again, waiting on some epoxy thickener to show up so haven’t gotten any further with adhering the skin to my transom. Drilled all the required holes for fittings and rivets through both sheets while it was temporarily taped/bolted in place.
  14. S

    Photos not saving to server

    I've been attempting to upload a photo for the past few days with no success.... same error message
  15. S

    1981 Springbok 18' Restoration/Renovation

    Unable to post a picture of the skin fitted onto the transom, getting an error message: "The upload failed because the file could not be written to the server. The site administrator will need to resolve this before any files can be uploaded." Will post pictures and more updates when i am able to!
  16. S

    1981 Springbok 18' Restoration/Renovation

    I finally got the outer transom skin cut from my cardboard template and after multiple times of sanding and filing, the fit is perfect. I used random nuts and bolts i had laying around to hold it in place while i went around marking where it needs to be trimmed down. I'm waiting on a new...
  17. S

    Lowrance LCX-112C

    fished yesterday on lake erie with the new transducer, set my system on the 200kHz setting and the depth read at all speeds. went to the dual frequency setting page and 50 did not read as expected. The depth matched up great with my garmin striker 4 and was off by about 1.2 feet as theyre...
  18. S

    Lowrance LCX-112C

    Got a brand new 83/200, going to set my system to 200 as I normally fish the 60-80 foot range on erie. I’ll know by Friday if this is the solution needed
  19. S

    Lowrance LCX-112C

    Any deeper than 30 ft I get a blinking depth that will occasionally find the bottom depth but never stays constant enough to mark fish. I’ve read through the manuals like a bible and other forums and went ahead and got a replacement transducer to see if that’s where my issues were coming from...
  20. S

    Lowrance LCX-112C

    I’ve got a lowrance unit, new to me, it’s got a chip in it that displays the mapping feature perfectly and the depths and contours align almost perfectly despite being older technology. The transducer I had was having some serious issues and whether I set it to 50 or 200 kHz would never pick up...
Top