Search results

  1. alldodge

    Blessed

    Way to go Mark, congrats
  2. alldodge

    1981 Rinker with Mercruiser 120HP, In what order should I do these repairs??

    3 - Replace all bellows 2 - Replace trim limit wires leave switches hanging 1 - Replace lower shift cable 4 - Install trim limit and trim position switches on gimbal ring
  3. alldodge

    Verado 5.44 Pinion height tool

    Read our rules @weprint closed
  4. alldodge

    New Stuff on Vehicles likes/dislikes

    Louisville ky to LA and back 2 times in a 70 plymonth Road Runner, no AC or anything else in the 1974 and 1978. Yes I did it swapping Right leg to Left leg, was 18 and 20, don't ever want to do that again being 50 years later
  5. alldodge

    Building a fishing boat.

    Looks good Have lanyard kill switch attached, and do you have a way to get back in the boat if you fall out?
  6. alldodge

    New Stuff on Vehicles likes/dislikes

    That's been on all the last vehicles including this Jeep but I don't use it because don't need the extra room. Was in my brother in laws Ford explorer in the back seat. When he opened his door the seat started coming back and started to roll over my toe, not good.
  7. alldodge

    New Stuff on Vehicles likes/dislikes

    Wonder if rain-x will get gummy on the headlights like it does on the windshield during the winter?
  8. alldodge

    New Stuff on Vehicles likes/dislikes

    Traded the wifes XT5 for a Jeep Grand Cherokee, like it much better with it sitting higher but miss the street sign reader in my truck. This is a limited model so I thought with Nav and the rest it would have it but nope, come on Overland and Summit. My truck and her XT5 with move the seat...
  9. alldodge

    No dipstick on 1989 era 3.0L?

    Most the 3.0 has the stick coming out of the upper side of oil pan Could be pan was replaced
  10. alldodge

    No dipstick on 1989 era 3.0L?

    All 3.0 have a dipstick Look starboard side for a hole
  11. alldodge

    I/O (Sterndrive) Conversion to Outboards

    Things keep getting heavier and heavier, hope your initial calculations are within limits when finished. Either way this is a great build and will be awesome when done
  12. alldodge

    Exhaust riser restrictor plate - Volvo Penta sterndrive 3.0 GLP-D 4-cylinder petrol

    Yes, hose item 9 should stay much cooler
  13. alldodge

    I/O (Sterndrive) Conversion to Outboards

    Not as critical as doing a I/O but when ya get a bit closer, suggest use 2 straight edges (one on each side) and measure that way
  14. alldodge

    Exhaust riser restrictor plate - Volvo Penta sterndrive 3.0 GLP-D 4-cylinder petrol

    Yes, hose 19 would be there to use the plate, otherwise use full flow gasket
  15. alldodge

    Shifts into reverse but won't shift into forward

    Need to start from scratch with the cables, there not adjusted correctly
  16. alldodge

    Exhaust riser restrictor plate - Volvo Penta sterndrive 3.0 GLP-D 4-cylinder petrol

    Welcome The exhaust defiantly needs cleaning, but I would replace them. The reason the pressure builds so high is due to the restriction in the exhaust
  17. alldodge

    Volvo Penta 3.0GS Restrictor Plate position on Riser

    Yes, it's more than 90 days old since last post and you are not the original poster Please, read our rules, closed
  18. alldodge

    Live well pumps

    It's a Rule 500 GPH
  19. alldodge

    Live well pumps

    The First one is a Johnson, other is a Rule Need to be able to read the numbers on the side if you want the same size. They are both probably a 300 to 500 GPH pumps
  20. alldodge

    Replacing Bravo 1 lower shift cable

    Your trying to split a hair but I'll bite Get the boots and clamp from Merc/VP and you will get a quality clamp. Buy one from Sierra or other and it can be a crap shoot Does this help?
Top