Search results

  1. Piece715

    Restoring 1986 Sea Nymph SS155 (pics)

    Re: Restoring 1986 Sea Nymph SS155 (pics) On a more uplifting note I was able to make it on the water with some friends on Monday. It was nice to have a relaxin day away from the garage. We were on Greer's Ferry Lake and a buddy came of with our next adventure. Meet Arkansas' tallest...
  2. Piece715

    Another E50BELCOB question

    When servicing the lower unit the trim tab bolt sheared on me because the shop that last serviced my motor did not put any antiseize or grease on the bolts. The bolt had to be drilled out and I am waiting to get it to a machine shop to be plugged and retapped. First question is will it hurt...
  3. Piece715

    Restoring 1986 Sea Nymph SS155 (pics)

    Re: Restoring 1986 Sea Nymph SS155 (pics) Ahhh Arkansas summers! Now if was only from my boat!
  4. Piece715

    Restoring 1986 Sea Nymph SS155 (pics)

    Re: Restoring 1986 Sea Nymph SS155 (pics) Since i have a failure to launch this weekend (unless I can run the boat in the water without the trim tab plate) I decided to work on some cosmetic stuff I have been slacking on doing. Here are the back cushions for the bow seating. Have them held on...
  5. Piece715

    VRO fail... I think we have a problem...

    Re: VRO fail... I think we have a problem... Went and picked up the fuel pump at lunch... $125 with tax not too shabby for a dealer and hopefully to be on water this holiday weekend... I explained to the guy that was helping me what I was doing and he stated this should work fine for that...
  6. Piece715

    Restoring 1986 Sea Nymph SS155 (pics)

    Re: Restoring 1986 Sea Nymph SS155 (pics) Ok went and picked up the fuel pump at lunch... $125 with tax not too shabby... I explained to the guy that was helping me what I was doing and he stated this should work fine for that... Although he didn't know the motor but anyways... I'm gonna give...
  7. Piece715

    Restoring 1986 Sea Nymph SS155 (pics)

    Re: Restoring 1986 Sea Nymph SS155 (pics) Since i am replacing the whole VRO pump i need all the inlets and outlets plus the pusle. The sierra should work if i could attach it to the block somehow, but this pump it is a 3 line pump, pulse(power) line, inlet and outlet lines. So I'm...
  8. Piece715

    Restoring 1986 Sea Nymph SS155 (pics)

    Re: Restoring 1986 Sea Nymph SS155 (pics) Ok now I'm really confused. According to the site i ordered the part from... i found this at the top of the screen - Item [BRP-0395713] has been superseded with item [BRP-0438556]. but yet the site let me order the item... it lists this Sierra...
  9. Piece715

    Restoring 1986 Sea Nymph SS155 (pics)

    Re: Restoring 1986 Sea Nymph SS155 (pics)
  10. Piece715

    1985 E50BELCOB Outboard 50 hp - Unidentified wire and found retaining Trunnion

    Re: 1985 E50BELCOB Outboard 50 hp - Unidentified wire and found retaining Trunnion Ok for clarification. To test the Hot horn I need to disconnect the knife connector under the rubber in the red circle in pic. Turn on the motor and then just touch the wire coming from the red throttle plug...
  11. Piece715

    VRO fail... I think we have a problem...

    Ok... I went out and tried to test fire the motor yesterday. When pumping the primer bulb i noticed that there is a gas leak in the engine. The leak is at the seam of the housing of the VRO pump We had the motor running for about 10 sec before it died.. Started again and prob 5-8 sec run...
  12. Piece715

    Restoring 1986 Sea Nymph SS155 (pics)

    Re: Restoring 1986 Sea Nymph SS155 (pics) The motor has been running on premixed since before I owned her. The oil inlet is currently plugged and it wasn't me that did the bypassing. The oil tank was still in the boat... i thought it was a reserve gas tank, held about a gallon ish... I...
  13. Piece715

    1985 E50BELCOB Outboard 50 hp - Unidentified wire and found retaining Trunnion

    Re: 1985 E50BELCOB Outboard 50 hp - Unidentified wire and found retaining Trunnion Could have been... quite the possibility. The motor has been running on premixed since before I owned her. The oil inlet is currently plugged and it wasn't me that did the bypassing. The oil tank was still in...
  14. Piece715

    1985 E50BELCOB Outboard 50 hp - Unidentified wire and found retaining Trunnion

    Re: 1985 E50BELCOB Outboard 50 hp - Unidentified wire and found retaining Trunnion I see what ur sayin Mark... but look in this picture... That nut is just connected to a stem coming off the motor... looks like a ground to me... It even has the clamp that holds the bundle of wires together...
  15. Piece715

    can anybody help to understand what this instrument is?

    Re: can anybody help to understand what this instrument is? I'm thinking windlass control... top knob either fuse or speed adjustment?! Just a guess but found this while searching Best guess was windlass... many boats come prewired even though there may not be one
  16. Piece715

    Stereo components and wiring - Good how to website or manual????

    Re: Stereo components and wiring - Good how to website or manual???? Just wanted to chime in to give ya a relative size of the M7. I have the CDM6 installed in my boat. From what I can remember the difference in the M7 vs the M6 is the watts per channel the head unit pushes out. May be some...
  17. Piece715

    1985 E50BELCOB Outboard 50 hp - Unidentified wire and found retaining Trunnion

    Re: 1985 E50BELCOB Outboard 50 hp - Unidentified wire and found retaining Trunnion So my buddy that is storing my boat has been real sick over the past couple of days so I have been avoiding the bio hazard as i already had by near death experience for this year. But i dropped off some food and...
  18. Piece715

    Restoring 1986 Sea Nymph SS155 (pics)

    Re: Restoring 1986 Sea Nymph SS155 (pics) Here is the diagram for the Seal, Gearcase, inner exhaust... It is #47... Guessing this should be replaced?! While looking at this diagram I noticed the Anode #80. Now when the motor was painted this was not removed so it is covered in paint and...
  19. Piece715

    1985 E50BELCOB Outboard 50 hp - Unidentified wire and found retaining Trunnion

    Re: 1985 E50BELCOB Outboard 50 hp - Unidentified wire and found retaining Trunnion Here is the diagram for the Seal, Gearcase, inner exhaust... It is #47... Guessing this should be replaced?!
  20. Piece715

    Restoring 1986 Sea Nymph SS155 (pics)

    Re: Restoring 1986 Sea Nymph SS155 (pics) Through some searching right now I found that the retaining triunnion is from the intake manifold and primer system.... Here is the diagram from the Evinrude site... It is #20... ... This doesn't seem good... Suggestions?! HELP :facepalm:
Top