Search results

  1. Piece715

    Restoring 1986 Sea Nymph SS155 (pics)

    Re: Restoring 1986 Sea Nymph SS155 (pics) Here I slapped this together based off a basic 6 terminal switch. If this is correct... can some explain why the original diagram has "load -" next to each terminal accepting a positive feed?
  2. Piece715

    Restoring 1986 Sea Nymph SS155 (pics)

    Re: Restoring 1986 Sea Nymph SS155 (pics) Ya the swithces have me confused... The issue I'm running into is that the tips of this switches are illuminated. The diagram of the switch was pulled from the company. This DPDT switch does have 8 terminals the middles ones on top and bottom are the...
  3. Piece715

    Long run of battery cable... AWG?

    Re: Long run of battery cable... AWG? For the Master Power switch. Would i just wire the switch into the system in the 8 awg coming from the negative common bus bar and the 8 awg positive after the 60 amp breaker. Placing the switch here would allow me to control the power wires supplying the...
  4. Piece715

    Restoring 1986 Sea Nymph SS155 (pics)

    Re: Restoring 1986 Sea Nymph SS155 (pics) Ok well here is my first attempt at a wiring schematic for the boat. I have this posted in the electronic forum as well. I am posting it here in case one of the experts stumbles across it. I know there are errors; please help me out its the last...
  5. Piece715

    Long run of battery cable... AWG?

    Re: Long run of battery cable... AWG? OKKK Who wants to play a game?! It's kinda like the Where's Waldo puzzle books. Except instead of finding Waldo you find where Mark screwed up. This was my first attempt at a wiring diagram so there are bound to be mistakes. I feel I'm missing a fuse...
  6. Piece715

    Long run of battery cable... AWG?

    Re: Long run of battery cable... AWG? Ok so i stumbled across this schematic. So i am going to want to go this route with the negative common bus bar. Would I a postive common buss bar after the switch? Also in this set up I am going to want a fuse (what size?) with 6 inches of positive...
  7. Piece715

    Long run of battery cable... AWG?

    Re: Long run of battery cable... AWG? I guess im confused on your set up sschefer. Bringing the + and - to separate terminal blocks and then going to the fuse block just adding more wire to the system. Oooohhh wait... this gives you more room to add power wires for future installs like my...
  8. Piece715

    Long run of battery cable... AWG?

    I have posted these questions in my restore thread in my signature but figured i'd shoot them towards the experts. This is copy and pasted so ask if ya need some clarification on anything just shout. Please correct me as I'm sure i have messed something up, but hey that why they call it a...
  9. Piece715

    Restoring 1986 Sea Nymph SS155 (pics)

    Re: Restoring 1986 Sea Nymph SS155 (pics) Weird! Looks like i falsely accused iboats.... My other computer that I was using last night and this morning won't allow me to post any pics it just errors; even in photobucket. Oh well here are those two pics finally The switch according to...
  10. Piece715

    Iboat app for iPhone or other mobile device

    Anybody ever pitch the idea for an iPhone app? The site runs rather slow when using the Internet for the full site. Maybe just a mobile site?
  11. Piece715

    Restoring 1986 Sea Nymph SS155 (pics)

    Re: Restoring 1986 Sea Nymph SS155 (pics) Ok im in the process of buying wire. Going with 2 six gallon tanks the splashwell is filled. The 12 gallon tank would not fit in the splashwell. This situation has forced me to move the batteries to the bow seating one in front of each console. The...
  12. Piece715

    New Boat...Couple Easy Questions

    Re: New Boat...Couple Easy Questions Well the switch looks like its for water pressure, not sure what it does but this is what i based it off of ..... I'm going to defer to the engine experts on the filter.. good luck! Edit: I became curious... the water pressure switch is to gain pressure...
  13. Piece715

    Restoring 1986 Sea Nymph SS155 (pics)

    Re: Restoring 1986 Sea Nymph SS155 (pics) More work done! Man do I hate drilling through plexiglass... very nerve racking! But finished the dash panels and installed them. Must say I think they came out well for a homemade job :D Gonna tackle running the steering and last little odds and...
  14. Piece715

    Alumacraft Backtroller 17 Restore

    Re: Alumacraft Backtroller 17 Restore If that rivet is above the waterline it shouldn't be too much of a deal. I had three above the waterline in mine from where the controls mounted to the hull. I just drilled out the rivet and replace it with same diameter bolts with rubber washers to...
  15. Piece715

    Restoring 1986 Sea Nymph SS155 (pics)

    Re: Restoring 1986 Sea Nymph SS155 (pics) Finished bow seating and sub woofer box/mount... well ish... still need to do the nose piece and finding it difficult because of the bend... any ideas?
  16. Piece715

    Restoring 1986 Sea Nymph SS155 (pics)

    Re: Restoring 1986 Sea Nymph SS155 (pics) Thanks Huron! Your work is looking great as well! Here is the finished bow except for the seating; getting foam today. Guess im going with 2 6 gallon tanks as i think thats all that will fit in my splash well. Batteries will have to be moved up...
  17. Piece715

    Restoring 1986 Sea Nymph SS155 (pics)

    Re: Restoring 1986 Sea Nymph SS155 (pics) Made a box into the bow seating to mount the sub. It was either there or in the back to back seating. This way actually turned out to be easier to make.
  18. Piece715

    1982 AMF crestliner got it for free

    Re: 1982 AMF crestliner got it for free I didn't bolt my motor onto the stand. My transom bracket had a lip the went over the edge and i just set the motor up there. As long as its out of the way and not gonna get knocked or bumped; heck just lash the puppy on with some rope... that 90 has...
  19. Piece715

    Hoop-style ski hitch for outboard

    Re: Hoop-style ski hitch for outboard I haven't seen one that loops around like that but they make tow harness with self centering pulley for towing without a ski pylon. Don't know if this helps
  20. Piece715

    Restoring 1986 Sea Nymph SS155 (pics)

    Re: Restoring 1986 Sea Nymph SS155 (pics) Here are some of the dash goodies... just waiting on a couple more switches and I can finish the dash panel and run the steering. After that all that is left is wiring and covering the bow seats!!! WAHOOO H20 HERE WE COME!!!
Top