Search results

  1. legalfee

    94' Suntracker pontoon 30' controls question

    I would post your question to the Force forum. The kill switch is easy to bypass just unplug the yellow / black wire. https://forums.iboats.com/forum/force-chrysler-outboards.29/
  2. legalfee

    40hp force outboard owners. year? And wire question.

    This^^^ Google this part number for the 92-94 impeller: 47-f433065-2
  3. legalfee

    Buying a ‘toon advice

    We bought a 24ft 1995 Sylvan with a 90hp 2 stroke for 4K. The seats and carpet were not in good condition but we used it for a few years and replaced the seats and helm and had a vinyl floor put in for 6K. I have done most of the work on the motor and the next upgrade will be to a 4 stroke...
  4. legalfee

    Startup procedure

    On my 1995 90hp the above procedures. If it doesn't crank by the third or fourth try then this: Throttle to wide open, remove cowl, spray starting fluid into the three carbs. Start motor.
  5. legalfee

    What are the essential tools to keep on board?

  6. legalfee

    Suggestions for replacement floor covering

    This is what I got: Doesn't slip, doesn't get hot, easy to clean.
  7. legalfee

    221 Donzi

  8. legalfee

    Bimini replacement top; can't find same size as current one.

    You could just buy a 8 x 8 with the frame: https://www.pontoonstuff.com/collections/pontoon-boat-bimini-tops/products/heavy-duty-pontoon-bimini-tops
  9. legalfee

    Repairing Plexiglass Windshield

    I've sent my broken windshield to these folks. We'll see what happens. Thanks!
  10. legalfee

    Pontoon boat weight help

    What model? Here's a list from iBoat: 1970 Admiral1970 Bosun1970 Capri1970 Captain1970 Commander1970 Commodore1970 Ensign1970 Skipper
  11. legalfee

    Repairing Plexiglass Windshield

    Plastic guy wants $600 for a 19" windshield. I can buy a console for less than that.
  12. legalfee

    Need new primer solenoid for 1992 Force 150 hp outboard

    Google this part number: 819503A4
  13. legalfee

    Repairing Plexiglass Windshield

    When I removed my windshield from the helm it broke in half. I could not find a replacement so I'm thinking of trying to glue it. From what I've read Weld-On 4 would do the job and I would think I'd need two clamps. Has anyone had any experience doing this?
  14. legalfee

    New to Me Sun Tracker 24, A Question About Change Rooms

    We normally go to an island to swim and either go in the woods or in the lake.
  15. legalfee

    New to Me Sun Tracker 24, A Question About Change Rooms

    You could go with this:
  16. legalfee

    replacement pontoon furniture

    Definitely get seat covers. I got mine custom made and they separately cover the seats console and sun deck. To me this is better than the whole boat cover especially since I take my boat out in the winter and can leave some seats covered.
  17. legalfee

    Thanks to Jerry Jerry for all of his advice. Merry Christmas

    +1 Thank Jerry for all your help!
  18. legalfee

    Force 75 threw a magnet at us

    One suggestion I have is to get a CDI rectifier / regulator. I had ordered some cheap RRs and my tach was either jumping around or dead. Got a new CDI and my tach works like a charm.
  19. legalfee

    Best Pontoon Port a John / Changing Room

    What are you guys using? I'm thinking about getting a canvas changing room and port a john.
  20. legalfee

    Fence Panels

    How hard is it to replace fence panels? Should I get ,020 or .030? My panels are 20" so I guess I'd have to cut them.
View older results
Top