Search results

  1. Scott06

    a boat

    Yeah when I sold a good working boat, add said everything worked willing to water test. As mentioned 2.5/.3.0 are easiest to drain. Needs a carb rebuild means it doesn’t run well. Compression is not great wonder if done after it is hot it will be higher. when selling a boat I would not water...
  2. Scott06

    1989 Mercruiser 2.5L 120HP motor overheating trouble shooting

    A carb no it doesn’t get a kit from mikes carb parts. Otherwise yiu are throwing another unknown carb on it. stop throwing parts at it do it right do it once. is this the engine that may have fuel system contamination?if that is not fixed doesn’t matter what carb you put on it it will get...
  3. Scott06

    Cut out Switch Test.

    That’s what she said,.,yes without the stumble to unload the propthe back cut on the dog clutch teeth will not pop out into neutral. I think you have the old style switch not sure how much of an upgrade to the new style… if it requires new shift plate. if not local boat yard can prob find used...
  4. Scott06

    1989 Mercruiser 2.5L 120HP motor overheating trouble shooting

    As mentioned Maybe jets could be different. Why not rebuild the one you have
  5. Scott06

    Cut out Switch Test.

    Yes depending on how long you hold it, it should stumble if you keep holding it it will kill it
  6. Scott06

    Upper and Lower Drain Plug Merc Sterndrive Alpha 1 Gen 1 Question

    Don’t waste your time.take the outdrive off for the winter do the pressure test at your leisure over the winter. last fall when i went up to take the boat out, put boat in water off the hoist, saw an oil slick. my boat have never lost any gear lube… gear lube Is an inch low. Had fishing line...
  7. Scott06

    4.3L horsepower

    with a 2 bbl carb the 4.3 is rate at 190 HP at the prop, MPI s are 220 hp. As AD lays out see what is on there now or have it repaired get WOT rpm readings before tweaking pitch. if the boat is new to you spend some time seeing how it performs before trying different designs and pitches
  8. Scott06

    4.3L horsepower

    your 2004 with a 2 bbl carb is 190 hp at the prop, the MPI was 220 hp
  9. Scott06

    Gimbal bearing puller

    Ok Thanks I'll make sure to be prepared to drill holes in the channel for the studs when I get back up where my boat is.
  10. Scott06

    Gimbal bearing puller

    I was gonna use a 2" wide channel iron I had laying around , was assuming it would fit between the studs but wasnt 100% sure
  11. Scott06

    Gimbal bearing puller

    Does anyone have a dimension dwg of the stud pattern in the bellhousing? I bought the swiveling bearing removal tool plus some 5/8" fine threaded rod, making the steel to go across the bell housing.... boat is 5 hr drive away and I just stocked up on outdrive gaskets was hoping to avoid buying...
  12. Scott06

    Upper and Lower Drain Plug Merc Sterndrive Alpha 1 Gen 1 Question

    No running on the muffs will not show if any of the oil seals are leaking water into the gear case. Only way to tell is to take drive off , drain, and pressure test. There is a ton of info in the stickies and threads here on how to build a pressure tester and run the test.
  13. Scott06

    Another Winterization Thread!

    Depending on the exact set up it may be self draining. My merc drains with out any issue, but some of them have a trap in the cooling hose
  14. Scott06

    lower unit

    Yes if you have two RH props then no counter rotation. You should be good to go with the spare lower you have.
  15. Scott06

    Upper and Lower Drain Plug Merc Sterndrive Alpha 1 Gen 1 Question

    Can always flush with kerosene or diesel pressure test it don’t just assume it was the missing washer
  16. Scott06

    Gimbal bearing came out with the drive shaft

    It’s rusted to the driveshaft not loose in gimbal housing. Typical of boat that have had water in bellows and sat
  17. Scott06

    lower unit

    being duals is one counter rotation? I could be confusing things for you, but not sure on an alpha if the counter rotation is done in the lower. Edit - SEI makes a separate lower for CR -https://www.sterndrive.cc/product/Fits-Mercruiser-Gen-I-Lower-C-R-8951A33.html So if the cracked lower is...
  18. Scott06

    Upper and Lower Drain Plug Merc Sterndrive Alpha 1 Gen 1 Question

    Yes each one takes a gasket they sometimes can stick in the housing. I think the OEM merc ones are yellow now but they used to be blue fiber paper ones back in the day. without a gasket you will get water in the gear oil
  19. Scott06

    Changed Gear Oil, Does this look right?

    The old lube looks like different lube maybe merc premium lube while is yellow brown vs the blue green of the high performance lube?
  20. Scott06

    3.0 L mercruiser issue

    Probably have multiple things going on. When it dies and will not restart does it have spark? Check with inexpensive spark gap tester. Fuel tank vent could be plugged, fuel system is definitely contaminated likely tank lines and carb need to be cleaned, but I would think that would not allow...
Top