Search results

  1. SteveinVA

    94 force 120 small plastic tube?

    On the top rear of the motor, there is a small hard plastic tube that goes up to the console. I cant remember what guage it connects to right now? Mine broke, motor still runs though. What is it for? thanks
  2. SteveinVA

    1994 force 120 stalling issue

    Ok done some research already. Found simiiar issues but no fixes. Motor runs on hose and in water with cowl off. Cowl goes on and it stalls shortly after. I have read exhaust leak but I dont know where to look. Also you would figure the inside of the cowl would get full of fumes and exhaust but...
  3. SteveinVA

    Old props

    Just wondering what you guys have done with them. Mines not terrible, Its aluminium and has about a dime size chip in one of the blades. I have heard of them being repaired. IDK I put mine on CL for 20 bucks, we'll see what happens:)
  4. SteveinVA

    94 Force 120 dies with cap on..help

    Ok, here we go. It runs with the cover off but a few seconds after I put it on the motor dies out. Done some searching and read it is a symptom of the carbs getting choked out by exhaust. Oh BTW it runs fine on the hose with the cover on. Also read that because the boat isn't in motion there is...
  5. SteveinVA

    1994 Bayliner Rendezvouse Ressurection

    Re: 1994 Bayliner Rendezvouse Ressurection these are the two main areas circled/boxed in red
  6. SteveinVA

    1994 Bayliner Rendezvouse Ressurection

    Re: 1994 Bayliner Rendezvouse Ressurection Yesterday evening I pulled out the DA with 60 grit and sanded all my areas down past what I hope was the top layer of original gel by removing most of the ill-matched patching. mixed up the best matched batch yet, and sprayed it on pretty thick. I've...
  7. SteveinVA

    1994 Bayliner Rendezvouse Ressurection

    Re: 1994 Bayliner Rendezvouse Ressurection Quick question? I am running into alot of dry glass under some of the plywood installed on the stern area for ladder mount, and rear tow(?) u bolts and such. Do I have to remove this stuff all the way down to the hull or can I just roll on some resin...
  8. SteveinVA

    1994 Bayliner Rendezvouse Ressurection

    Re: 1994 Bayliner Rendezvouse Ressurection the latest and greatest, Like they say, a pic is worth 1000 words.
  9. SteveinVA

    1994 Bayliner Rendezvouse Ressurection

    I had started a thread about this boat already, but wanted to start a new one on the actual restoration process. Background on this boat can be found here http://forums.iboats.com/boat-restoration-building-hull-repair/beginning-my-ending-605450.html And some "before" pics can be found here 94...
  10. SteveinVA

    The beginning of my ending

    Re: The beginning of my ending And almost last but certainly the worst Transom shaving from in between (scupper?) and motor bolts. and the close up comparison between starboard lower deck shavings, and transom, guess which is which? Gonna have alot of work to do this fall....Its a big boat too
  11. SteveinVA

    The beginning of my ending

    Re: The beginning of my ending Ok pics thing works. Here are some more and the first core sample of foam from the port side (beautiful) with water squezzed out on the Card board And here is how the wood, glass, and gelcoat all came apart, with foam sample General pic of boat with cover...
  12. SteveinVA

    The beginning of my ending

    Re: The beginning of my ending Potomac, Rappahanock Rivers and Lake Anna probably. Got some more pics to upload let see how this works First hole drilled, starboard side under deck Foam core sample from same side, they were damp, not soaked This plug is from the Port side, all the layer fel...
  13. SteveinVA

    The beginning of my ending

    Ok, where to start... Wife calls me on Skype while I am overseas for work and says "we need to talk" .. All married men usually know what that means and it usually ain't good. Anyway 1000 thoughts racing through my head and I settle on she is pregnant. So finally I ask her after telling me "we...
  14. SteveinVA

    quick question

    I keep hearing that the fiberglass is the structural element in glass on wood boats. So, why is it so bad with the exception of the transom if you have dry rot. I know wet wood adds weight but dry rot wood is lighter. Someone explain please thanks
  15. SteveinVA

    94 Force 120 Tach wire?

    Hi Guys, Just picked up a 94 Bayliner Rendezvous in need of alot fo work.(mostly cosmetic) I was hoping someone could tell me if the stock wiring for a 94 Force 120 has connections for a tach? And which kind of Tach I would need. Thanks
  16. SteveinVA

    pontoon regulations

    searched the interweb with no luck, is there a requirement that pontoon boats have railings or fencing? thanks
  17. SteveinVA

    Looking for some design feedback...pontoon jon boat?

    a 16 foot by 6 foot floating platform basically to fish from. gonna be in mostly small lakes, and rivers. I have never seen anything like what I am thinking about.that could be cool or it could be because it wont work. What do you guys think? please ask questions and comment, I am seriously...
  18. SteveinVA

    My first motor

    Ok hello all, was hoping someone could give me some guidance. I got a donor 6hp Johnson. model # CD25R. Ser # J2909879 first off can anyone tell me what year that might be? Is it a 79? read somewhere the last two digits is the year. So here whats happened so far. Got the motor cleaned it up with...
Top