John Boats
Recruit
- Joined
- Jul 27, 2007
- Messages
- 2
I purchased a boat two weeks ago with a 1982 mariner inline 6 115hp. I took it to the lake and it ran good for about 5 mins. It bogged down and hasent ran good since. It will idle good until 200 rpms and then it starts missing. Since then i have rebuilt the carbs and changed the plugs. When i give it throttle it bogs down at about 3000 rpms. I have ran a compresson check and all cylinders have 100 pounds of compresson. This motor also set for five years. I drained and cleaned all the old fuel out. I ran some test on the stator wires and they dont look go for the bottom switch box. My manual says the the stator is bad. Would some one have any other ideas for me to try?