Re: 1993 60HP - how to remove flywheel mount in order to remove trigger assembly
Hope you marked that flywheel so you know which way it goes back on the center hub!!!!
You can pull the center hub with an automotive-type harmonic balancer puller.
You'll need the appropriate-length 5/16" fine-threaded puller bolts. Be sure you get Grade 8 or better or the bolts might break.
Or, use the proper Mercury flywheel pulling tool which screws into the center hole then presses against the top of the crankshaft with a puller bolt.
Various places to get this tool, see the last post in this message thread for info:
http://forums.iboats.com/showthread.php?t=358385&highlight=flywheel+puller
When you reassemble the flywheel, be sure to use a drop of Red Loctite on each hub bolt and torque to 24 ft-lbs (you'll have to do the conversion to Newton-Meters, Mate!).
HTH.............ed