225 Oceanrunner Water Pump R&R

[gary91]

I need to replace my water pump on a new to me 1994 Oceanrunner. I have replaced a couple water pumps in other outboards but I am hoping someone will give me the 'Cliff Notes' version on how to replace it on this motor. I want to tackle it today and would greatly appreciate your help.<br /><br />Thanks,<br />Gary

 

[angus63]

Re: 225 Oceanrunner Water Pump R&R

Remove lower unit bolts (including under trim tab)<br />Disconnect shift linkage<br />Drop lower<br />Remove pump ***'y<br />Replace pump ***'y (a little dish soap helps)<br />Clean lower unit mating surfaces<br />Guide water tube and shaft when assembling<br />Curse and swear and finally get shift rod reattached<br />Test<br />Good luck<br />PS - Having the OMC manual should be step one

 

[gary91]

Re: 225 Oceanrunner Water Pump R&R

Angus:<br />Do I need to put the shifter in any particular gear before I disconnect the linkage and drop the lower unit?

 

[Reel Appeal]

Re: 225 Oceanrunner Water Pump R&R

It may be easier to put the shifter into forward gear before disconnecting.Also,unless your a weight lifter,get a buddy to help (hold) re-install the unit.

 

[Walker]

Re: 225 Oceanrunner Water Pump R&R

Disconnect the shift rod first, before the lower unit bolts.

 

[seahorse5]

Re: 225 Oceanrunner Water Pump R&R

There are two different factory water pump kits for that motor, depending on the shaft length. Use your complete model number when ordering parts. 25-30" shafts use the #5001595 water pump kit. Don't get them mixed up, they look almost identical.