Does this look OK? Was planning to sand it down and put on one more layer?
C Chasefamily Cadet Joined May 30, 2021 Messages 9 Yesterday at 5:41 PM #1 Does this look OK? Was planning to sand it down and put on one more layer? Attachments Screenshot_20260712_194058_Gallery.jpg 387.2 KB · Views: 14
alldodge Moderator Staff member Joined Mar 8, 2009 Messages 44,254 Yesterday at 6:04 PM #2 @MikeSchinlaub
M MikeSchinlaub Master Chief Petty Officer Joined Jan 14, 2025 Messages 857 Yesterday at 7:21 PM #3 I can't tell from the pics, too far away. It looks like you just layed a square patch directly over some damage? Any grinding before? The closest one looks like a hole. Did you fill it in, if so with what?
I can't tell from the pics, too far away. It looks like you just layed a square patch directly over some damage? Any grinding before? The closest one looks like a hole. Did you fill it in, if so with what?
C Chasefamily Cadet Joined May 30, 2021 Messages 9 Yesterday at 7:39 PM #4 The first one is a hole. I filled it in with liquid resin. I beveled around the hole in top and bottom side and grinded all around it with 40 grit to hopefully create a good bonding surface. Last edited: Yesterday at 7:53 PM
The first one is a hole. I filled it in with liquid resin. I beveled around the hole in top and bottom side and grinded all around it with 40 grit to hopefully create a good bonding surface.
M MikeSchinlaub Master Chief Petty Officer Joined Jan 14, 2025 Messages 857 Today at 8:06 AM #5 Ok, not too bad then. It doesn't look like there are any air bubbles. Are you going to bodywork and paint it?
Ok, not too bad then. It doesn't look like there are any air bubbles. Are you going to bodywork and paint it?
