knightflyer
Recruit
- Joined
- Aug 10, 2008
- Messages
- 2
ok, new to this forum but looking for help. Out today on my old pontoon, pulled up to a dock to drop off a passenger, shifted in "R" and went about 2 ft and engine died. Would not restart, let me be clear, the starter would not engage completly dead. Threw out the anchor and was able to get back to the dock. Started trouble shooting: turning key gets me nothing, no starter and I normally get a short buzzer when the key is turned, nothing. Here is another finding, tilt/trim will not work. The Tach is frozen on 1200rpm, that about where it was when the engine quit. Checked all electrical conections all good, checked all fuses all good. I have power to all lights, radio, horn etc. Shift unit is OMC and engine is a 70hp Evinrude. Double check the kill switch, lanyard is attached, seems ok. Any help on where to look would be great. Thanks knightflyer