Got Filters??

mlschmitz

Cadet
Joined
Jun 30, 2009
Messages
22
Anybody know anything about fuel / water seperator filters. Can I bypass (hose through) my existing filter and install it externally. Can it be installed before or after primer bulb??

Thanks fellas!
 

RLT III

Petty Officer 2nd Class
Joined
Jan 27, 2010
Messages
180
Re: Got Filters??

Yes it's a good idea to have one. I installed mine before the bulb as suggested from the mech at west marine to the idea if i had to replace it on the water or anytime i could fill it with fuel by pushing it in instead of pulling through.
Either way you should have one
 

achris

More fish than mountain goat
Joined
May 19, 2004
Messages
27,468
Re: Got Filters??

Anybody know anything about fuel / water seperator filters. Can I bypass (hose through) my existing filter and install it externally. Can it be installed before or after primer bulb??

Thanks fellas!

What engine are we talking about here?

Regardless of the engine, it is NOT a good idea to bypass any internal filter. However, adding an external water separator is a very GOOD idea. It should be installed between the tank and the primer, never after the primer.

Chris.......
 

will941s

Chief Petty Officer
Joined
Oct 1, 2007
Messages
540
Re: Got Filters??

Did mine a week ago, put it before the primer. Left the factory filter in place and it works like a charm. I think the primer pulled the gas through the filter on the 4th pump. Alot more peace of mind knowing all the gas going to the engine is nice and clean.
 
Top