How to make sense of CDI ignition troubleshooting guide, '98 Ocean Pro

B

btravlin2

Petty Officer 2nd Class
Joined
Sep 7, 2010
Messages
108
I've got a 150 Opti that was running great, and then died. No spark. I'm looking at page 61, CDI troubleshooting guide for my motor.

The second title is NO Spark on any cyclinder, and the first line is: Disconnect both of the black/yellow stop wires at the power pack and retest.

The problem is, I don't have any black/yellow wires going into the top of the PP. I've got two 6 wire plugs, and none of the wires are that color.

Any ideas? What am I missing?
 
B

btravlin2

Petty Officer 2nd Class
Joined
Sep 7, 2010
Messages
108
Re: How to make sense of CDI ignition troubleshooting guide, '98 Ocean Pro

My bad. The port side is 5-wire. It was getting dark when I realized it. I'll pick up where I left off this weekend. I have to make sure I can turn it off if it starts.
 
B

boobie

Supreme Mariner
Joined
Nov 5, 2009
Messages
20,826
Re: How to make sense of CDI ignition troubleshooting guide, '98 Ocean Pro

Woody, what good does a Merc service manual do on this site ??
 
You must log in or register to reply here.
Top