Re: I have no reverse can u help?
Check the linkage, and drain lower unit into a pan. Run your finger thru the lube,and feel for chunks.<br />If you got chunks, gear damage<br />If you got no chunks, recheck linkage.<br />under carb, at the base of the cowl, is a knuckle with gears on it. Have someone work the control,while you observe this knuckle. If it is moving into revese, you may have a sheared shift shaft...Yesh (srry I had to do that).In order to do this, you must drop the lower unit,as per directions in the manual.<br /><br />The shift shaft has spline teeth on the end of it. Inspect these teeth for missing,worn, or twisted teeth.