Re: Is there supposed to be a key in the keyway
I got your PM, but will answer here.
Yes, without the impeller key, it is useless. The key may still be in the keyway on the shaft, have a look, or you may have dropped it when removing the impeller. Either way, if you cannot find it, you will need one. Dont forget to change the o ring at the top of the drive shaft, and grease the splines with marine grease. Personally I would change the impeller while you have it apart, but that is just me. You dont really know how long it has been in there, as the motor is new to you. Be sure that the housing is clean, without grooves. Same goes with the impeller housing plate. Grooves will cause issues with the cooling water. Also ensure that the intake area is clean of debris. Also, BEFORE you bolt everything back up, run compressed air, or the garden hose up the water line to ensure that it is not clogged. You dont want to bolt it all up, then have to drop it again when you are getting any flow. let us know how you do.
