Jackplate question Ranger 365V

[ggault2b]

I have a 1990 Ranger 365V with 150 Evinrude and 5.5 inch manual jackplate. I want to experiment with larger setback without spending alot of money. Is it effective/safe to bolt in a 4 inch setback between the jackplate and motor?

 

[micel]

Re: Jackplate question Ranger 365V

Just make sure you have a quality spacer and your transom is strong enough.

 

[rndn]

Re: Jackplate question Ranger 365V

You will place extra strain on you transom. Picture tightening up a nut with a 4 inch wrench and then try the same thing with a 20 inch wrench. The farther away from the transom you go the more strain you place on it.

 

[Dhadley]

Re: Jackplate question Ranger 365V

You're headed in the right direction. Those boats need as much help lifting the nose as possible. Usually a 10" jackplate and a very good bow lift prop like Turbo Lightning works best.