Question for Dhadley

Gary H NC

Fleet Admiral
Joined
Dec 1, 2005
Messages
8,972
I put the replacement lower unit on my 175 johnson and am re-using the same bolts.The bolt that goes in before you mount the trim tab is now too short. Is it possible the new lower is not recessed as much at that bolt hole? I removed the other bolts thinking one maybe a little longer but thats not it. The big bolt with the 5/8 head right next to this bolt hole works fine.Should i just get a longer bolt or will the larger one hold it ok and not put a bolt in that hole? Strange..:rolleyes:
 

ezmobee

Supreme Mariner
Joined
Mar 26, 2007
Messages
23,767
Re: Question for Dhadley

I had my LU off the other day and I noticed that the bolt under the trim tab was missing. Certainly doesn't seem to bother it any.
 

Dhadley

Supreme Mariner
Joined
Feb 4, 2001
Messages
16,978
Re: Question for Dhadley

A longer one will work or leave it out. As mentioned lots of them are missing. I'd just get a longer one so it's there.
 

Gary H NC

Fleet Admiral
Joined
Dec 1, 2005
Messages
8,972
Re: Question for Dhadley

Ok, I would rather have one in it.Can't figure out why i does not fit...
Thanks..:D
 
Top