imported_beck
Seaman
- Joined
- Jul 7, 2006
- Messages
- 56
Hi to all,
1981 johnson 70hp, mod#J70ELCIM; ser#J5479196
Replaced water pump then went into stat area.
Oem manual calls for a p/n382385 but dealer says it's superceded with a p/n396987. I bought the unopened pack with the stat p/n396987, opened it and the actual stat has a p/n397056 printed on it ? Seems like it may be the wrong stat.
Also the old stat was metal and it looks like the actual passage is larger that the new stat. The new stat is a thick brown plastic stat and the passage looks like it would pass less water when open than the old stat.
I lubed the old stat and it slides on the little metal rod smoothly now, I plan to check it in hot water. I think the old one would be better than the new one if it works.
I didn't have temp. problems I was just updating the pump and stat.
Any info. would be appreciated.
1981 johnson 70hp, mod#J70ELCIM; ser#J5479196
Replaced water pump then went into stat area.
Oem manual calls for a p/n382385 but dealer says it's superceded with a p/n396987. I bought the unopened pack with the stat p/n396987, opened it and the actual stat has a p/n397056 printed on it ? Seems like it may be the wrong stat.
Also the old stat was metal and it looks like the actual passage is larger that the new stat. The new stat is a thick brown plastic stat and the passage looks like it would pass less water when open than the old stat.
I lubed the old stat and it slides on the little metal rod smoothly now, I plan to check it in hot water. I think the old one would be better than the new one if it works.
I didn't have temp. problems I was just updating the pump and stat.
Any info. would be appreciated.