On the top rear of the motor, there is a small hard plastic tube that goes up to the console. I cant remember what guage it connects to right now? Mine broke, motor still runs though. What is it for?
thanks
Ok done some research already. Found simiiar issues but no fixes. Motor runs on hose and in water with cowl off. Cowl goes on and it stalls shortly after. I have read exhaust leak but I dont know where to look. Also you would figure the inside of the cowl would get full of fumes and exhaust but...
Just wondering what you guys have done with them. Mines not terrible, Its aluminium and has about a dime size chip in one of the blades. I have heard of them being repaired. IDK I put mine on CL for 20 bucks, we'll see what happens:)
Ok, here we go.
It runs with the cover off but a few seconds after I put it on the motor dies out. Done some searching and read it is a symptom of the carbs getting choked out by exhaust. Oh BTW it runs fine on the hose with the cover on. Also read that because the boat isn't in motion there is...
Re: 1994 Bayliner Rendezvouse Ressurection
Yesterday evening I pulled out the DA with 60 grit and sanded all my areas down past what I hope was the top layer of original gel by removing most of the ill-matched patching. mixed up the best matched batch yet, and sprayed it on pretty thick. I've...
Re: 1994 Bayliner Rendezvouse Ressurection
Quick question? I am running into alot of dry glass under some of the plywood installed on the stern area for ladder mount, and rear tow(?) u bolts and such. Do I have to remove this stuff all the way down to the hull or can I just roll on some resin...
I had started a thread about this boat already, but wanted to start a new one on the actual restoration process. Background on this boat can be found here http://forums.iboats.com/boat-restoration-building-hull-repair/beginning-my-ending-605450.html
And some "before" pics can be found here 94...
Re: The beginning of my ending
And almost last but certainly the worst Transom shaving from in between (scupper?) and motor bolts.
and the close up
comparison between starboard lower deck shavings, and transom, guess which is which?
Gonna have alot of work to do this fall....Its a big boat too
Re: The beginning of my ending
Ok pics thing works. Here are some more
and the first core sample of foam from the port side (beautiful) with water squezzed out on the Card board
And here is how the wood, glass, and gelcoat all came apart, with foam sample
General pic of boat with cover...
Re: The beginning of my ending
Potomac, Rappahanock Rivers and Lake Anna probably.
Got some more pics to upload let see how this works
First hole drilled, starboard side under deck
Foam core sample from same side, they were damp, not soaked
This plug is from the Port side, all the layer fel...
Ok, where to start... Wife calls me on Skype while I am overseas for work and says "we need to talk" .. All married men usually know what that means and it usually ain't good. Anyway 1000 thoughts racing through my head and I settle on she is pregnant. So finally I ask her after telling me "we...
I keep hearing that the fiberglass is the structural element in glass on wood boats. So, why is it so bad with the exception of the transom if you have dry rot. I know wet wood adds weight but dry rot wood is lighter. Someone explain please
thanks
Hi Guys,
Just picked up a 94 Bayliner Rendezvous in need of alot fo work.(mostly cosmetic)
I was hoping someone could tell me if the stock wiring for a 94 Force 120 has connections for a tach? And which kind of Tach I would need.
Thanks
