Search results

  1. K

    Inboard 2011 4.3 Merc

    Sorry - new shift bellow onto the shift cable. I’ve tried white grease.
  2. K

    Inboard 2011 4.3 Merc

    Hello Any trick how to get the shift bellow onto the new shift cable? I’ve tried white grease. Any ideas would be great. Been trying to get this puppy on for 2 hours now.
  3. K

    Inboard 2011 4.3 Merc

    Ok Going to tackle this baby tomorrow and I’ve looked at a few videos about this and I’m confused what way the clips should be installed on the bellows. Some videos say the clips should be at the top and others says the bottom. Can anyone clear that up which way they should be installed...
  4. K

    Inboard 2011 4.3 Merc

    Hello, thank you so much!
  5. K

    Inboard 2011 4.3 Merc

    Hello I couldn’t find a shift bellows video. Does anyone know if I need to pull the whole cable out from the engine compartment or is there another trick?
  6. K

    Inboard 2011 4.3 Merc

    Hello again, Does anyone have a trick about getting the shift cable off to replace bellows. Do I need disconnect from the engine and pull it out from the back or can I disconnect from the rear?
  7. K

    Inboard 2011 4.3 Merc

    I have the drive off which took me about 15 minutes. Does anyone have a trick on how to change the shift bellow? Do I need to pull the whole shift cable out our does it come off by the front of the bellow?
  8. K

    Inboard 2011 4.3 Merc

    Hello Does anyone have a good video link that shows how to take off the stern drive and the bellows. I can’t find a good one that shows all of it.
  9. K

    Inboard 2011 4.3 Merc

    Ok Maybe my last question, I looked at the drive and looks like I can pull that off myself. 6 bolts and the bolt for the trim rod. My question, after I get off the drive will I be able to replace the bellows without taking anything else off? Did the stern drive just need to come off? It’s a...
  10. K

    Inboard 2011 4.3 Merc

    I will look for a video and see if I can tackle this baby
  11. K

    Inboard 2011 4.3 Merc

    Thank you everyone.
  12. K

    Inboard 2011 4.3 Merc

    Thank you so much for your help. I will try and figure out how to pull off the drive and get this baby fixed.
  13. K

    Inboard 2011 4.3 Merc

    Ok I found a crack. It’s on the cable shift bellow. Do I need to pull the drive off to fix that? Is there a way to temporarily patch that thing.
  14. K

    Inboard 2011 4.3 Merc

    I can see it dripping at the bottom part of the drive where it comes into the boat and it drips into the bilge area. It most be a bellow. I may not be able to see a crack.
  15. K

    Inboard 2011 4.3 Merc

    Hello I don’t see any cracks in any of the bellows. They look like in good shape from what I can see. Any thoughts would be appreciated. It’s frustrating.
  16. K

    Inboard 2011 4.3 Merc

    Thank you for your help on this. I just looked and I don’t see any cracks in the bellows. So I’m not sure why it’s leaking in the up position. Any other ideas?
  17. K

    Inboard 2011 4.3 Merc

    I did not check them. This is the first inboard I’ve owned. Is this something I could fix without bringing in?
  18. K

    Inboard 2011 4.3 Merc

    Hi I have a 2011 Tahoe Q5i with inboard 4.3 Merc. Having a problem when the motor is up when it’s in the water it leaks inside the boat and the bilge needs to turned on. When the motor is down it doesn’t leak. Any ideas? I can’t figure it out. Thank you for your time.
  19. K

    Gale 1959 SeaKing 5hp water impeller help

    Hello Everyone, I got her apart and does anyone know of a website where I can order a new impeller for this out baby?
  20. K

    Gale 1959 SeaKing 5hp water impeller help

    Omg Can thank everyone enough. Thank you. Going to tackle this baby tomorrow.
Top