Search results

  1. C

    1994 28HP Johnson Help

    This may or may not help, but use this link to diagram and look @ part #'s 40, 41, 43, 46, 47, 48, and 49. diagram shows where hoses and tee's go. http://www.marineengine.com/parts/johnson-evinrude-parts.php?year=1993&hp=28&model=J28ESLETD&manufacturer=Johnson&section=Intake+Manifold
  2. C

    Johnson 6.5 HP Two Stroke

    this may or may not help. As you browse through this range of models, remember these general guidelines: If your outboard is a 1979 model or older, you can contact Ken Cook Company in Milwaukee, Wisconsin, for owner and technical literature. Contact your authorized Johnson® Outboards...
  3. C

    1999 Evinrude 15hp 4 stroke. Model E15EL4SSE Fuel Pump Issue

    Thanks, that will be a good start. Thanks again.
  4. C

    Looking for help, new boat owner

    Head bolt torque is 98-120 https://www.joeoutboard.com/resources/Manuals/Johnson/OMC12-20hp.pdf Keep this for reference
  5. C

    1999 Evinrude 15hp 4 stroke. Model E15EL4SSE Fuel Pump Issue

    I hope you took pictures of internal parts, I have a pump that someone has already been in. Don't know what parts I should have. I have not taken it apart yet. If you know how many pieces there are or have pictures, I would surely like to have them. Thanks
  6. C

    6hp 6rl75r

    I don't know but, I found the cancel button.
  7. C

    6hp 6rl75r

    What happened? cannot find the thread on forum. What does ignoring info mean? OK, somehow an ignore button must have been pushed. got it cleared now.
  8. C

    6hp 6rl75r

    Can't find this thread on the forum. What happened? Did we get kicked off?
  9. C

    6hp 6rl75r

    I think they only give a phone # to call. they also have an interchage page for part #'s. I did see they use the same piston, so rings should work.
  10. C

    6hp 6rl75r

    these people will probably have your rings.. set # 8306 for 1 piston . https://www.americanhammered.com/ these fit 1965-1972 6 hp. yours is 1975, wont hurt to check it out.
  11. C

    6hp 6rl75r

    Name City State US BOATWORKS INC KANSAS CITY KS Website KLAUS MARINE INC ETOBICOKE ON Website SMITTY'S MARINE INC LAKE CITY MN Website Last update: Also try 2020-parts.com
  12. C

    6hp 6rl75r

    I'm sure their machine shop can measure pistons and rings. I also found your rings on line. Does your motor use 1, 2, or 3 rings per hole?
  13. C

    6hp 6rl75r

    Don't know if they still do or can, but when I worked for NAPA, we could take old rings, measure and match up a set. Since all rings in your motor show to be the same, you only need to match one. Just a thought.
  14. C

    6hp 6rl75r

    Evinrude Johnson 386692 piston 0376994 Part # 376994 $70.00 386692 1 in stock Seaway Marine
  15. C

    Evinrude Recoil

    See if this helps. 304500 — PIN,GUIDE (2 required per assembly) 0391617 starter pulley and pin
  16. C

    2000 E15R4SSE /cooling problem

    I did test run, and is how I determined a blockage. That rubber had to go someplace, I would think. I reviewed pros & cons about this unit on forums, and all sources I could find on internet. Got a spare parts motor with it. Compression was 135/105. But valves were off a good bit, too tight...
  17. C

    2000 E15R4SSE /cooling problem

    I did test run, and is how I determined a blockage. That rubber had to go someplace, I would think. I reviewed pros & cons about this unit on forums, and all sources I could find on internet. Got a spare parts motor with it. Compression was 135/105. But valves were off a good bit, too tight...
  18. C

    2000 E15R4SSE /cooling problem

    Bought motor, found only the hub and 1 tip of impeller. I have cleaned everything I can without going beyond,thermostat, hoses,. applied water thru flush plug in side of engine, finally got some flow from pee hole. Can you tell me what needs to be dismantled for cleaning?
View older results
Top