Search results

  1. Scott06

    Engine replacement help…

    At least you can save the starter bolts... Seriously it always amazes me how much damage can be done for lack of ten minutes pulling drain plugs. Was the crank bent or broken or what ever ?
  2. Scott06

    Bellows Water Detector - Retrofit?

    It makes sense for the application if you ignore all the corrosion BS they had. If you had a large boat that costs a grand to pull makes sense. If yo are a fresh water boater who keeps it on a lift, get down on your hands an knees and keep an eye on it. I am surprised VP took that long to get a...
  3. Scott06

    Engine replacement help…

    If they are from a freshwater location no issue using used. We are on an inland lake and unless you don't winterize the manifolds last the life of the boat- our and our friends boats have lasted 25-40 yrs.
  4. Scott06

    Engine replacement help…

    My experience was good there, but this was a new partial engine not reman. Yes there are cheaper ways to do it but if you want to buy and engine and enjoy the boat spend for the new GM base engine. After 8 trouble free years I am glad I spent the extra money on it given how much we use our boat.
  5. Scott06

    Replacing ignition on old 165hp GM inline-6

    You may have to use the conversion kit as I am not finding a Delco EST kit ( or at least one that is not listed as obsolete) or a similar sierra kit for any of the chevy straight sixes that were used from 60's through early 80's. My grandfather had a 150 hp version in his '66 Penn Yann back...
  6. Scott06

    Replacing ignition on old 165hp GM inline-6

    Yes essentially. Delco est was made by delco and there are many copies of it. Both mercruiser and volvo used the est for many oem igntion systems . you have a straight 6 not a V6 right? I that kit is actually for a V6.…
  7. Scott06

    Replacing ignition on old 165hp GM inline-6

    X2 on Kenny’s post a delco est kit is the hot ticket for electronic conversion with an oem quality product.
  8. Scott06

    305 boat cam

    Quadrajet properly rebuilt is one of the best carbs out there. Key is if you have a good core. i run a 1409 on my boat and have run other edlebrock carbs on muscle cars they are good and easy to set up especially if you are cutting your teeth on carb tuning
  9. Scott06

    Bellows Water Detector - Retrofit?

    Those drives are geared towards a different market than the land of 10,000 lakes- salt water environments where the boat doesn’t get pulled much. Looks like a conductivity sensor in the transom housing. Probably a good idea until the sensor fails and you pull the drive Because of it...
  10. Scott06

    305 boat cam

    something like this would work nice for you. Probably pretty close to OEM specs maybe half a notch hotter. https://www.compcams.com/xtreme-marine-212-218-hydraulic-flat-cam-and-lifter-kit-chevrolet-small-block.html they also make a complete kit with timing chain valve springs...
  11. Scott06

    Bellows Water Detector - Retrofit?

    Never heard of this as an oem install or retrofit. I dont think you have to remove the drive to inspect. yes you cannot see if there is water in there without removing the drive, I inspect my Mercruiser bellows in both the spring and the fall. Generally you see them getting harder, chaffed and...
  12. Scott06

    Question about the right propeller for my boat

    Dingbat this was a great response laying out the give and take of different props.
  13. Scott06

    Question about the right propeller for my boat

    As other have said if you are hitting 5k at WOT with a normal load you are propped right. if you normal load is 7 people go down in pitch , 4 blade will help if you want to do water sports. As stated above how you use the boat will dictate propping. My normal use is 5-6 adults for watersports...
  14. Scott06

    Engine replacement help…

    The mercruiser coupler is made to bolt to a stick shift flywheel - flexplate used on an auto wont work. You can always buy a new flywheel but better if it comes with it
  15. Scott06

    Engine replacement help…

    I got a new base engine from Michigan Motorz in 2016. They sell remans that are fairly reasonably priced. Obviously cheaper if you can get a truck engine from wrecking yard but for turn key was a nice cost balance in between piecing it together and new bobtail. They did give me $150 for my...
  16. Scott06

    Engine replacement help…

    KISS principal may be just keep it V6. Not sure if your current V6 is a 4 bbl / 205hp or 2 bbl/175 hp version. A Vortec Headed 4.3 is like 220 /225 hp with a 4 bbl carb, and weighs less than a V8. 4.3 usually cracks in the valley below the heads. Not sure how much it had been used, they some...
  17. Scott06

    Engine replacement help…

    I once made and welded similar brackets out of stainless sheet bent into an L at like a 95 degree angle , weld a tube to support it. Again see if a welding shop can make something up Would like be your best bet .
  18. Scott06

    Engine replacement help…

    Yeah I agree finding and older non vortec may be difficult given the age and makes less power. ou can easily find marine intakes for vortec 4.3 or vortec 5.0/5.7 Engines. If you have a new carb I’m sure that can work, but may need re jetting. on the swim platform brackets not sure if they are...
  19. Scott06

    Engine replacement help…

    Absolutely - 4.3, 5.0, or 5.7 get a newer vortec headed one, change head gaskets, freeze plugs, circ pump, and swap over your accessories. You will need a marine intake, and carb. If yo have a thunderbolt the distributors are the same except trigger wheel and cap. Although the engine will run...
  20. Scott06

    Engine replacement help…

    I was worried he expected you to fix it. Yes 4.3 and 5.7 are a lot of same parts sans 2 cylinders. It saved me about $1500. I even was able to reuse most of my cooling hoses, fuel pump and filter, wiring harness (did need a V8 ignition module), starter, motor mounts, flywheel cover, coupler...
Top