Search results

  1. dingbat

    I want to place a metal patch on a Zinc-Coated steel gasoline tank opening.

    Have you run the calculations of how much gas you can keep in a sealed tank before the pressure buildup causes it to explode? Would highly advise some sort of a pressure relief valve should things go south
  2. dingbat

    I want to place a metal patch on a Zinc-Coated steel gasoline tank opening.

    Interesting….. we have no natural gas infrastructure to speak of. Everyone uses oil, propane or electric (heat pump) to heat. True, but propane is all about the convenience of long term storage between uses.
  3. dingbat

    ignition switch power

    Your comments would imply your trying to connect a 1997 with a pre-1996 switch Here is where the additional wires get connected
  4. dingbat

    ignition switch power

    There is no "standard" when it comes to ignition switches. Unless you replaced the switch with the exact same make and model there is no guarantee the point to point wiring is the same. You need to get a schematic for the motor and match the wires up to the proper contacts on the switch
  5. dingbat

    I want to place a metal patch on a Zinc-Coated steel gasoline tank opening.

    I can get by running the entire house with a 4,500 watt portable generator as I still have oil heat. Gives me a bit over 24 hours from 5 gallons of fuel. Surprised you didn't go with a propane generator. Fill up the tank and forget about it until empty.
  6. dingbat

    I want to place a metal patch on a Zinc-Coated steel gasoline tank opening.

    Stabilized, stored in a sealed tank, just about forever The E10 in mine is going on it's 3rd winter
  7. dingbat

    Can not stop wanting a Butterball Turkey.

    This years menu.... Rockfish crab imperial Oyster Stuffing Crab Soup Oven Roasted Asparagus and Sweet Potato BlueFin Sashimi as an appetizer
  8. dingbat

    How long is the skeg on a mariner 30/40

    Aluminum dissipates heat very efficiently. Not enough heat to do any damage. Would be more concerned about damage to the electrical systems if the battery wasn’t disconnected
  9. dingbat

    Setting up for House Battery -> looking for feedback on loads

    What is the goal of your rewire? In my case, the goal is redundancy. Brought about by a situation on a friend’s boat where we lost his starting battery (shorted cell) 20 miles out of port in the waining hours of a mid-February day The motor is wired to the switch, not a battery. That way I can...
  10. dingbat

    KY ABC Auction

    That’s still pretty cheap $5.50 -$6.00 are happy hour prices around here. $7.50 restaurants, $8-10 at the brewery
  11. dingbat

    Has anyone used the ready lime (not the brand name) to descale their outboard

    Calcium is very susceptible to acidic solutions. White vinegar being one of them. Lots of commercial descaling products on the market. We use this to clean buildup out of our aluminum coolant housings https://rydlymemarine.com/
  12. dingbat

    How to set up an induction tachometer

    https://tinytach.com/tinytach
  13. dingbat

    I want to place a metal patch on a Zinc-Coated steel gasoline tank opening.

    How old is the tank? Metal fuel tanks were fabricated using Terne sheet until they switched over to plastics. Terne sheet is a lead, tin and antimony alloy used almost exclusively on fuel tanks when I got into the metals industry in the late 70’s. It’s easy to solder, but considered...
  14. dingbat

    How to set up an induction tachometer

    I have 3, digital inductive tachometers. They all are configurable from 1 spark per 2 revolutions to 8 sparks per revolution
  15. dingbat

    Can not stop wanting a Butterball Turkey.

    Turkeys are dumb with a capital D…lol Had a 5 or 6 show up in the backyard a couple of weeks ago. Took them 10 minutes to figure out how to get past the four board, split rail fence separating yard from the field. Could easily squeeze between the boards or backed up a bit and flew over it...
  16. dingbat

    I have a Lawrence 9 ti2, blank white screen.

    Power and ground issues can cause all kinds of weird problems in electronics. First thing I’d do is a permanent fix for the power/ ground issue. Run through the transducer configuration page to confirm the transducer is setup properly. Configure a split screen display using sonar and...
  17. dingbat

    Grease Zerk Fitting Question . . .

    The feature was patented prior to 1951 so it’s been around at least 75 years
  18. dingbat

    How bad of an idea is this for OB support while trailering?

    Wow.....such a violate response to the mere suggestion there is a "no drill, no tool" solution to the problem.........lol Not sure how slipping a block of wood or PVC (with slot) around the extended tilt cylinder, then lowering the drive to hold the block in place is "adding armour", but OK.
  19. dingbat

    How bad of an idea is this for OB support while trailering?

    Sounds like you need a scag saver, not a transom saver In that case, a “ram support block” would work well, but a 2x4 wedged between the tilt ram and motor would suffice w/o the need for tools
  20. dingbat

    Sensor identification

    Given the location I’m guessing the temp switch
Top