Search results

  1. jerryjerry05

    Tuorqe on head bolts 2008 25hp Suzuki

    Need tuorqe values on the head bolts for a 2008 DT25 25hp Suzuki. I bought the service manual but it hasn't arrived yet. Who'd think it takes 6s day for a book to be shipped from one side of Fl. to the other??? Thanks Jerry
  2. jerryjerry05

    2008 25hp Suzuki

    Model DF25 02502f 8825 The port cyl. is covered in oil. Comp is 180X2 Won't fire on port cyl. Will run on the stbd. Good spark on both plugs. I believe the valve stems seals are leaking. Anyone run into this kind of problem? My cutomer just bought this boat after it sat for 10+ years. From...
  3. jerryjerry05

    Filter crossover

    Mercury 2016 60hp 4stroke The filter is 35-8M0065103 Any idea what a crossover filter would be? I'm installing the Mercury one` but was curious what the other is? TY!!!
  4. jerryjerry05

    PM not working????

    Hey Mods, saw I had a message. Opened it and it went crazy. Flashing and flipping and not working right????
  5. jerryjerry05

    25 2009 F25LA operating range rpm.

    200925hp What's the max rpm's ? It's on a Geeno and it doesn't seem to be operating, running up to speed. I have a Tiny Tach and will find the rpm's at wide open. Just need to compare to the right specs/ THANKS!!!
  6. jerryjerry05

    DVA or Peak Reading Voltmeter, what is it and what does it do??

    Got this email from CDI Ignition. Explains the DVA Meter and attachment for a regular analog meter. Maybe include it somewhere in the stickies? Maybe testing stator, trigger etc.?? WHAT IS DVA??? So just what is DVA? More than likely you have heard the term but have never understood exactly...
  7. jerryjerry05

    2010 115 TLR 4st.

    How do you pressure test the high pressure pump in the VST? It does't have a Schrader valve? Thanks.
  8. jerryjerry05

    98 30hp.

    98 30hp. Today, 05:00 PM 98 30 hp on a 16 ft. alum. Jon boat.Bass tracker. What size prop should I get? . THANKS!!
  9. jerryjerry05

    115 Yam limp mode.

    Yamaha 115 4 stroke. 2001 Turn the key on and an alarm comes on and doesn't go away. Not over heated. Cold motor. New impeller. Starts but goes into limp mode?? what to check?
  10. jerryjerry05

    Johnson 225 2005

    Starts and runs and then after a while as much as an hour it bogs and won't accelerate. Not running hot. Good comp. no water in fuel. Filters clean. Any idea what the fuel pump pressure should be? A customer called and gave me the description and asked for help?? Had a similar problem with...
  11. jerryjerry05

    2002 115 4 stroke gas in the oil.

    Working on a 2002 115 4 stroke. Change the oil, has about 2 gallons in the oil pan. Smells a little like gas???? \ ANY ideas?? THANKS!!
  12. jerryjerry05

    Yam 2002 115 4 stroke

    What oil/weight for the crankcase? Quantity? THANKS!!
  13. jerryjerry05

    Tune up?

    2002 115 4stroke. What constitutes a tune up on this motor? My neighbor wants it done. THANKS!!
  14. jerryjerry05

    Aluminum rub rail repairs??

    Just picked up a 15ft. Aluminum Bass Tracker. The past owners have drilled a bunch of holes in the rub rail around the boat. They are rough and can catch fishing lines and cast nets. Wondering the best way to fill or finish these holes? Some holes were for a canvas and a Bimini . THANKS!
  15. jerryjerry05

    HPDI OX66 200hp

    The boat I'm working on 2005/6/7 and the covers say HPDI What is the difference in the 200 HPDI and the 200 OX66 My fishing partner has the2005 OX66 and it looks the same as the HPDI Thanks
  16. jerryjerry05

    Trim F250 2007

    Looking for a spanner to take the T@T end caps off so I can change the seals? I've seen some at $500 down to $80 My Mercury and other wrenches don't fit,and the one that comes close might screw the holes and I won't do that. Anything more reasonable?? THANKS!!
  17. jerryjerry05

    Yamaha oil tank fungus= engine failure.

    This is for all outboard owners that have a reserve and main oil tank for their outboards. Yamaha is the one most affected by this problem, because of the design of their tanks.. The moisture/condensation in the tanks settles to the bottom, over time it can grow a fungus and after some time...
  18. jerryjerry05

    EGR 2005 200hp hpdi

    Was cleaning the carbon from the EGR valves on the twin motors. Both joints or plungers were solid and closed off. The question is the stbd. motor when the key was off the EGR had power(12v) to the unit. And it was HOT!!!! The port EGR with the key off had no power to it??? Why would one...
  19. jerryjerry05

    2005 yam 200 hpdi oil pump

    Is it a serviceable pump? Rebuilable? Or need replacing?
  20. jerryjerry05

    2/200 HPDI excessive oil usage and idle problems.

    Pair of 200 yams. Both run fairly good at high speeds. Stbd. motor uses 3X the oil the other does. I haven't looked at the linkage on either motor. How to adjust or check the oil systems? Haven't done a compression test yet. The port motor trolling speeds: it starts at 750-800 then increases...
Top