Search results

  1. S

    Starting Delay 1986 Johnson 150 HP Crossflow V6

    Ignition switch or solenoid.... Flip a coin, good guesses really. Something is going, buy new parts and throw them in the glove box.
  2. S

    Bottom cylinder sounds bad 1997 evinrude 3 cylinder

    So you've moved the coil and spark plug up one and what happens? It moves or stays?
  3. S

    96 johnson. Link and sink

    And 96 Johnson what?
  4. S

    96 johnson. Link and sink

    Not exactly sure what you're saying or asking, but it sounds to me like you're not setting your throttle cable right.
  5. S

    Going from 25 hp to 35 hp

    Is that 96 engine a 3 banger like mine?
  6. S

    Going from 25 hp to 35 hp

    Get a 40....big difference.
  7. S

    Fixed but nervous

    No....it will not but if it fails and you overheat the engine, bye bye outboard. It can test fine (with a volt meter) but when you put that kind of amps through....then that condition applies.
  8. S

    Fixed but nervous

    Yes, kill circuit can be intermittent. Corrosion was most likely your problem. Did you test your overheat system? I do mine every year.
  9. S

    Going from 25 hp to 35 hp

    HP is HP....often times when your using the same block size kick out of the hole and getting on a plane are better. My 2 cents.
  10. S

    J40ELCR WOT needs key pushed and released for full power

    Cracked fuel lines indicates replacement light unless you like trouble.
  11. S

    E starter won’t engage.

    What's your battery voltage at the battery, at the solenoid and finally at the starter while cranking. Post numbers and we will tell you were your problems ly.
  12. S

    Water leak at lower unit - 1977 70 hp evinrude

    It went down about a week ago and the moderator said they are working on it.
  13. S

    J40ELCR WOT needs key pushed and released for full power

    I use gas welding torch cleaners...comes in a kit. Their like mini file pokers and a little vinegar helps.
  14. S

    Opinion on Evinrude 25hp not peeing

    Videos work. Everything seems to be in order...only thing I can think of is either your not lining it up correctly or the seal on the top of the pump is missing or wore out.
  15. S

    What's wrong here.

    You forgot to say , Alex!
  16. S

    What's wrong here.

    Okay, thanks for the update....must be frustrating for you guys.
  17. S

    What's wrong here.

    To the young newbies here who are working on outboards, this is a question for you guys mainly. The pros can reply with other positive opinions. Also, anybody know why we can't post pictures still? Been quite a while. Here's a YouTube for your enjoyment!
  18. S

    power trim stays on 150 2000 johnson

    Very elegantly stated.
Top