Search results

  1. dingbat

    Truck reporting over hitch weight

    The other thing of note is your manual says the overload is calculated, not real. Gross Combined Weight (GCW) Alert If equipped, the GCW Alert can display a message in the Driver Information Center (DIC), indicating that the estimated combined weight of the vehicle and trailer may exceed the...
  2. dingbat

    Truck reporting over hitch weight

    Went through this exercise this Spring. Factory recommends tongue weight for that trailer at 7% which puts you 30% heavy on your tongue weight. Are you getting this number with a completely empty truck? Class 4 hitch? Boat not properly positioned relative to the center of gravity will make...
  3. dingbat

    Short term fuel trim

    No…fuel delivery (filter, injectors, fuel pressure, etc.) or O2 sensor
  4. dingbat

    Outboard conversion w/out a bracket??

    The bracket is used to help provide additional floatation given your moving the center of mass of the propulsion system back roughly 24-30” from it original design location FWIW my outboard transom is reinforced with aluminum bracing
  5. dingbat

    My stern drive oil is black

    Old or lots of use. I run Merc high performance oil. Oil comes out black every fall. Gets 150 hours or so a year on it thuogh
  6. dingbat

    Outboard conversion w/out a bracket??

    That splash well isn't the issue. Lots of boats out there running w/o splash wells It's all the modifications required to the transom to mount and support the outboard. Basically remove and replace in it's entirely.
  7. dingbat

    Fuel Gauge making full, even with no power.

    A "true" short to ground should have tripped a breaker or blown a fuse. More the symptoms of a current leak. Are you sure the sending unit is wired correctly? I have installed a couple of senders didn't match conventional color. Pink wire went to ground and black wire went to the sender
  8. dingbat

    Engine Overspeed?

    Why would you need 6 different brands of scanner? I own four “modern” cars. Somehow manage to identify what little has needed to done with a $20 special off Amazon.
  9. dingbat

    Fuel Gauge making full, even with no power.

    Does not sound like a ground problem. You have a short to ground somewhere. Since the bilge pump no longer works, I would start there. They are notorious for leaking current to ground upon failure
  10. dingbat

    Can't decide who's the most annoying

    Exactly what not to do…..most of these “reach outs” are trolling. Once your email/phone number is confirmed as a valid contact, you get added to the “active” list and the phishing begins
  11. dingbat

    Can't decide who's the most annoying

    Used to get a ton of spam email and phone calls. Took care of phone calls by sending anyone not in my contacts list directly to voice mail. Blocked them if they didn’t leave a message. Have a spam blocker on my email. Catches probably 90% of the incoming spam. The rest get added to the...
  12. dingbat

    Need help with converting MSD toilet to just portable, carry off and dump.

    After looking at the kit you posted, the larger of the two certainly is not 1-1/2 NPT threaded cap as evidenced by the two piece design. Looks like a collar off a 1-1/2" trap adapter with a plastic thread protector as the cap The smaller one still looks to be a NPT cap, but the larger one...
  13. dingbat

    Rev 4 to something else

    Interesting…stainless on stainless is infamous for gulling. Goes against all engineering norms. Wait and see how that works out for them in the long run. Solid hubs shouldn’t be a problem if you have a good prop shop. Sent my 4 blade (Evinrude Offshore Renegade) out for balancing and polishing...
  14. dingbat

    Engine Overspeed?

    No, it’s not ok for any length of time. Limiting top end rpm to within rated rpm range is done by prop selection. You need to learn not to push the throttle to hard or increase the pitch of your prop
  15. dingbat

    Rev 4 to something else

    Stainless?? You mean SSR series? Just a different sleeve material/configuration. Assuming they use rubber instead of delrin (hard plastic) sleeves which are used on the regular Flo-torque. Had to go with a Rubex, RBX hub to get rid of the prop rattle on my Enertia
  16. dingbat

    my 1989 30hp yamaha is overheating, alarm goes off, motor is pissing strong, i check my thermostat \, it is missing, Could this cause to run hot?

    A “strong” pisser is a meaningless measure of flow through the motor. Yes, not having a thermostat will cause an overheat Heat transfer is a delicate balance between flow and surface area. Throw either out of balance and you have problems
  17. dingbat

    Johnson 1988 vro 225 hp fixing up a Frankenstein

    The orientation of the crank to flywheel is determined by the key way. Rotating the crank to locate a piston in a particular location isn’t going to change that
  18. dingbat

    2005 osprey new 380-c-b with dp nema2000 info

    I see no reason for it not to work as long as you didn't order a SeaTalk version
  19. dingbat

    Need help with converting MSD toilet to just portable, carry off and dump.

    Your too kind....any "emergencies" on my boat involves a 5 gallon bucket Looking at the parts manual for said unit, the unit has Discharge: PVC fitting connects to 1.5-in. (38 mm) ID discharge plumbing. Vent: 5/8-in. (16 mm) ID hose fitting Discharge - 1-1/2" Schedule 40 PVC Cap or Plug...
  20. dingbat

    2005 osprey new 380-c-b with dp nema2000 info

    What is a “yacht device” and an “ecv”? Are the device(s) NMEA 2000 compliant?
Top