Search results

  1. G

    1990 Trophy twin Force 120s prop question

    Any idea what size 3 blade I should use. I was thinking 13x19 or I can reuse the 21 pitch that I have but they are missing the press in hubs. Where do I get the hubs? I am looking online and most are for 4 1/4 drives. And the Michigan Wheel ones like 995112 say they are for 88-94 Force but...
  2. G

    1990 Trophy twin Force 120s prop question

    I contacted Bayliner and they said since tye model is so old they cannot help me tey to contact a dealer. So I contacted 5 places. One responded they have to contact Bayliner, so wait until Moday. There has to be people on this site that had twin Force 120s on that 2302 Trophy If I am not...
  3. G

    Milky fuel in carb intake force 85hp

    Here is a picture of piston 4 on mine through a scope. At tyecenter you will see the clear water bubbles that look pretty clean. The milky stuffwasin the exhaust area on mine.
  4. G

    1990 Trophy twin Force 120s prop question

    I have 2 sets of 4 blades. The 13x19 were the 4400, and the ones I bought recently 13.5x15 are over revving . Both are 4 blades.
  5. G

    1990 Trophy twin Force 120s prop question

    I did contact lile 5 designated dealers and sent email to Bayliner. Will see what they say. This is not a high performance boat I am using it to go 30 miles tops usually off tye coast for fishing. So I want to make sure I don't screw up anything being 5hat it is an older boat and engines. One...
  6. G

    1990 Trophy twin Force 120s prop question

    Jerry said to call Bayliner and ask them what the originals are on the 1990 Bayliner 2302. The other issue is finding these damn props for the older 4 inch drives. The newer Mercury are 4.25in
  7. G

    1990 Force 120HP B model cannot seem to find the issue with sporadic no start

    Nevermind was gonna ask if it can be done in the parking lot in neutral. Notice you mentioned it can.
  8. G

    1990 Trophy twin Force 120s prop question

    Thanks The Force Power So yesterday I took it offshore at Marina del ray. It was a bit choppy 2.5 foot waives coming in slowly plus lots of chop. I could feel it being under propped. But the weird thing was the port engine while also revving up from being underpropped did not slip as quickly as...
  9. G

    1990 Force 120HP B model cannot seem to find the issue with sporadic no start

    I do suspect an adjustment might solve it. But if I adjust the roller where the 2 marks don't fall in the middle that won't cause issues right?
  10. G

    Force 120hp won't start

    I guess the reeds being stickymight be an issue. Are they plastic or stainless?
  11. G

    1990 Trophy twin Force 120s prop question

    The props are aluminum, as I said the boat weighs 3500 plus additional weight added to it. The boat is a 1990 Trophy cuddy. The engines are 120hp each. You had or worked on those right? The guy before me had the 13x19 but since the RPM was only getting to 4400 I thought of changing them to...
  12. G

    1990 Trophy twin Force 120s prop question

    I took off the 19s 4 blades. Do the 3 blades give more RPM? Lets say 3 blade 19th? My friend has a Trophy 19feet with one Mercury 125 has a 13x19 on it. I forgot the max RPM at WOT
  13. G

    85hp 3 cylinder Force carburetor throttle plates.

    Isn't there a bar that attaches all 3 carbs. On dual carbs it's pretty simple you undo the screw on the tie-bar from the starboard side of the carbs and they fall flat. At wot you adjust the throttle link and the plates move together. In between you adjust the roller. For 3 I don't know for...
  14. G

    1990 Force 120HP B model cannot seem to find the issue with sporadic no start

    I nolonger get notifications for responses on my posts. Is everyone in the same boat?
  15. G

    Force 120hp won't start

    So gas coming out when choking could be one or more reeds defective. There are 4. Mine are stainless steel. The engine is not leveled when cranking. The needle valve not stopping the fuel when bowl is full. If you have the carbs out press the float in and blow through the fuel line make sure it...
  16. G

    1990 Force 120HP B model cannot seem to find the issue with sporadic no start

    Yeah sorry about that, just looking for answers. Thanks Jerry.
  17. G

    1990 Trophy twin Force 120s prop question

    1990 Triphy 2302 twin Firce 1999 Trophy 2302 twin Force 120 engines. I think the boat weighs 3500lbs, but loaded for fishing it weighs at least 500 more. The boat runs great on both moroe now 13.5x15 but when I tried only one it cased the high rev. I guess they are meant for both to be used.
  18. G

    Force 120hp won't start

    You have to turn it upside down and let it fall to where the main jet is located. Not touching but closest to it. And the other way parallel to the body. What is the problem with your motor now?
  19. G

    1990 Trophy twin Force 120s prop question

    The boat came with 4 blade13x19 props but it only maxed at 4400 RPMs at WOT, so I got some 4 blade 13.5x15s and it does max out at 5000RPM now. If I run one engine though after 3000RPM it revs up like it's slipping and the boat doesn't pick up speed, both motors do it, just revs up to max really...
  20. G

    Force 120hp won't start

    I don't think it is supposed to be. All mine actually touch the side so don't force it in the middle
Top