Search results

  1. brian3127

    want to run my engine out of the boat.

    Thats the thing i dont have a plug like that, all i have is a wire harness that ties into a wire block on a plate that is still in the boat. so i dont have a wire harness on the engine. the picture show how its connected to the battery power when its in the boat. left side of picture.
  2. brian3127

    want to run my engine out of the boat.

    serial number 4920382 back story on the engine it started knocking last year. so we pulled it. Piston 3 was broke. we sent the block and the head out to a machine shop and they did their thing. Me and son just finished up rebuilding the engine and we want to start it and run it before we put it...
  3. brian3127

    3.0 mercruiser ran for 5 min good. Then Just died?

    that looks like really old gas to me.
  4. brian3127

    Thermostat

    i forgot I had a close up pic of it on my phone
  5. brian3127

    Thermostat

    If this isn't the correct one should I order a Pertronic unit
  6. brian3127

    Thermostat

    Thats not what it looks like. here is a pic of it. It has a blue rotor.
  7. brian3127

    Carburetor paint

    the only reason i ask is that when i cleaned the carb the paint on the carb was coming off with the carb cleaner. so i stripped the carb of all paint and figure why repaint it. speacialy if I have to clean it again
  8. brian3127

    what size kicker should I get.

    so it looks like 9.9 to 20ph is what most are suggesting. it would also be used to get us back if the main engine dies. thanks guys.
  9. brian3127

    Thermostat

    good question. there is an ignition module on the distributor looks just like a car setup. I don't know what the numbers are on it. The boat is still in it's winter cocoon.
  10. brian3127

    Thermostat

    Electronic ignition
  11. brian3127

    Thermostat

    I don’t have points It was changed over before I bought it Thanks for the info
  12. brian3127

    Thermostat

    Mercruiser 3.0 140hp
  13. brian3127

    Thermostat

    Finishing up putting the engine back together. Serial number 4920382 What temp thermostat is recommended
  14. brian3127

    Carburetor paint

    isnt the carb made from cast aluminum
  15. brian3127

    what size kicker should I get.

    I fish Lake Michigan.
  16. brian3127

    what size kicker should I get.

    I have an 19ft aluminum with a small cuddy what size 4 stroke kicker should I get for trolling. this is the boat. the tower was taken off so its just the boat.
  17. brian3127

    Carburetor paint

    even if im not in a salt water enviroment
  18. brian3127

    Carburetor paint

    could you just leave it bare ( no paint )?
  19. brian3127

    Merc 140 fuel pump install, no ros?

    I must have the other style then. I did not know that.
Top