Search results

  1. flyingscott

    Is this old Sylvan a good deal?

    Not a bad price at all.
  2. flyingscott

    Evinrude 70 hp 3-cyl 2stroke dies at high throttle

    Did somebody replace the VRO with a non VRO pump
  3. flyingscott

    Disconnecting Fuel line from the outboard

    Pretty sure the pro x is fuel injected that means electric fuel pump.
  4. flyingscott

    25hp Johnson outboard coughs some while running

    Open the low speed screw on the carb a 1/4 turn.
  5. flyingscott

    125hp ELPTO 2+2 miss/hesitation at high speeds

    You have to have a factory manual to work on this motor. That should be your first purchase.
  6. flyingscott

    The story of two motors - 75 Johnsons

    Or is it a fleet of junk?
  7. flyingscott

    The story of two motors - 75 Johnsons

    I have never seen anyone blance a 2 strk crankshaft. That is only a racing thing. If there is that much damage it must be replaced.
  8. flyingscott

    The story of two motors - 75 Johnsons

    Sorry why are you balancing the driveshaft?
  9. flyingscott

    The story of two motors - 75 Johnsons

    If you knew how easy it was to rebuild those motors you would do it. You could probably rebuild that power head for less than $1000 and it would be new. I dont know why more people don't.
  10. flyingscott

    Amazing

    The 3 cylinder was 1/2 of the 3.0 6 cylinder so it was a 1.5 litre. But it sat in the V6 chassis plenty of those out there. They were good sellers I owned one It was a nice motor. One huge advantage it had was because it sat in the v6 chassis everything was under the hood no external oil tanks.
  11. flyingscott

    The story of two motors - 75 Johnsons

    Why are you re sleeving? Why are you balancing the crankshaft?
  12. flyingscott

    12 Hp Scott fuel mix and age?

    24-1
  13. flyingscott

    Amazing

    Your motor is a1.7 litre I4 how is that double
  14. flyingscott

    Disconnecting Fuel line from the outboard

    I would be curious to know if you could even put enough pressure in the line to make the injectors work properly?
  15. flyingscott

    Transom Browning

    They did not clean the boat off. That happens when boats are kept in the water. Look on craigslist dozens of boats have that stain.
  16. flyingscott

    Serial number not showing up

    Where ar you from?
  17. flyingscott

    Crack in Hull

    Really the boat was well maintained yet it has a crack in the hull? Really That is an old crack. Not to mention it looks like they hit something to cause that.
  18. flyingscott

    1957 evinrude fastwin 18hp ventilation problems.

    That motor has points and condensors under the flywheel.. You should move this to the johnson evinrude Forum. Spark plugs are not your problem.
  19. flyingscott

    1957 evinrude fastwin 18hp ventilation problems.

    It sounds like your motor is running on one cylinder do a spark test. That motor I believe is only rated to 4500 rpm.
  20. flyingscott

    Crack in Hull

    I will be blunt Screw the complete overhaul. Go buy a different boat and chalk this one up as a learning experience.
Top