Search results

  1. S

    Evinrude 25hp outboard wants to die when I give it gas

    Post picture of the whole engine and the carbs.
  2. S

    Evinrude 25hp outboard wants to die when I give it gas

    That's the crappy one that screens boulders. I install a throw away plastic one on that same line. Pretty sure it's 10 microns.
  3. S

    2014 Evinrude KNOCKING sound

    Well your motor is not running perfectly. Try the E-tec web site at barnacle bills. Sounds like a loose sparkplugs but probably an injector or something. Don't run the motor until you get it figured out.
  4. S

    2013 Etec Steering Question

    First I would just remove the engine steering arm to cable and verify the engine swivels on its own. Then I heat the crap out of the tilt brackets while beating on them. Now that is what I do if the cable is stuck to the tilt tube. If the cable is froze to itself then that's easy. Unscrew the...
  5. S

    25hp evinrude outboard

    Funny, I have many of those 80's motors and none have that gearcase. Is that a Canadian thing?
  6. S

    1977 Johnson 140 can’t turn over

    Volts at the starter while it's spinning. Load test the battery with an old school toaster tester not the digital junk. Cleaning the outside of the starter? Look inside.....easy.
  7. S

    Evinrude 25hp outboard wants to die when I give it gas

    Send pics of fish too😆
  8. S

    Evinrude 25hp outboard wants to die when I give it gas

    Model number or at least the year if known. Most likely fuel carb related, is your fuel filtered? Either your running to lean or crud in carb.
  9. S

    J30JRSIE 30 hp Outboard - Carb Question

    Take the air box cover off, with the engine off, put it to full throttle and send us a picture of the inside of the carb. (Butter fly valve)
  10. S

    Johnson Outboard Motor MODEL NO J30PL4SD 4 Stroke 30Hps Stalls after 20 minute use, then restarts after waiting 5 minutes

    Well, I would shoot the head with an IR gun when it refuses to start.
  11. S

    1977 Johnson 140 can’t turn over

    What is your voltage at the starter when jumping it? I believe, if I'm remembering this correctly, it shouldn't be less than 10.2 volts.
  12. S

    25hp evinrude outboard

    I don't think that an 80ish outboard.
  13. S

    2013 Etec Steering Question

    For more proof, here is the swivel assembly for that motor. Standard tilt tube is clearly shown.
  14. S

    2013 Etec Steering Question

    It's a gen 1. You say Evinrude mechanic....there really isn't any. Evinrude is shut down. There is former mechanics and they are honoring warrantees and making parts so I guess that's what they mean. I purchased a 2009 in 2011 so there can be a discrepancy and it came with a 5 year warranty...
  15. S

    1977 Johnson 140 can’t turn over

    Dry motor with no lubrication? When you had it apart was the exhaust completely clear? Mud dobbers or something?
  16. S

    1977 Johnson 140 can’t turn over

    Sounds like your motor had more than a spruce up. With all the plugs out can you perform a compression test?
  17. S

    2013 Etec Steering Question

    "installed in 2021" "warrantee until 2027" "mechanic" This does not sound like a 2013 outboard. The Gen 2 had issues with their integrated steering system. I'm thinking maybe you haven't properly identified this motor.
  18. S

    2013 Etec Steering Question

    If it's a 2013 then it's a g1 so it's just a normal steering cable or hydraulic system. Most likely it's a stuck cable and it very common. Slide hammer, heat or whatever, it wouldn't be something that would stop me from buying a motor....just might help in negotiating a price. What's does he...
  19. S

    Intermittent spark on 1976 35 HP Evinrude

    This motor probably still needs something fixed. Keep running her.
  20. S

    J30JRSIE 30 hp Outboard - Carb Question

    Simple answer is "no"
Top