Search results

  1. JimS123

    Transom adaptor from 15" to 20"?

    I only had 2 oil injected engines in my lifetime. After the first I said never again. After the second I really mean it. I truly like power trim, but I don't really need electric start, assuming that the engine starts well.
  2. JimS123

    Looking for a light, all around anchor

    A 4 pounder on a 19 footer won't work in even the slightest wind or current. I don't understand why, but I have found that a fixed shaft Danforth works much better than a slip ring type. A few years ago I tried a Schene anchor and it worked quite well. But the chart vs. boat length / weight...
  3. JimS123

    Install a kicker bracket for a 4.5hp Merc on Swim Platform (Bayliner 175)

    I have heard good things about the new versions of electrics, as you state. Just never tried one personally. We fish lake Ontario for Salmon, out of Wilson or Olcott, NY. Lots of commercial guys here that guide for a living. I've never seen an electric in use. I imagine its a regional thing...
  4. JimS123

    Install a kicker bracket for a 4.5hp Merc on Swim Platform (Bayliner 175)

    It all depends on what you consider "trolling". If you are long lining with heavy rods and plugs, or if you are downrigging for deep water fish, a gas kicker is the only way to go. If you are moving around structure casting for bass an electric bow mount is needed. The Garelick bracket I...
  5. JimS123

    new mercury 60HP fuel connection

    Yes, that's the valve you need and that's the way to hook it up.
  6. JimS123

    Install a kicker bracket for a 4.5hp Merc on Swim Platform (Bayliner 175)

    Bee there done that on both counts. My current SeaRay has a Panther fixed mount bracket right on top of the swim platform. Once in position I drilled 6 holes right thru the bottom of the platform. Six 5/16" SS threaded rods cut to length, bolted in with big washers and sealed with 5200...
  7. JimS123

    Do older aluminum boats have the same issues with waterlogged foam?

    I gave the boat to my son for his pond. The boat was always rolled over when not in use. The wood that rotted was the on the outside of the transom, just where the motor would mount. Obviously, the inside wood was not exposed and it is still like new.
  8. JimS123

    Short shaft kicker for 20 inch transom

    I have used Garelick mounts in the past, but prefer the much better designs of Panther. Also, the EZSteers are good mounts, but IMHO they are too low in the water to make installation easy when in the water. My preference is to make my own. Quite simple. 5/16" threaded SS rods, covered in...
  9. JimS123

    40hp 1980s Johnson Value

    Its worth maybe $800, but only if it is a confirmed fresh water motor. If it saw salt water, its worth almost nothing. I'm speaking strictly about my area. Regardless, depending on where you live, you might be hard put to find someone to work on it. Parts are available, but not mechanics...
  10. JimS123

    Do older aluminum boats have the same issues with waterlogged foam?

    Transoms rot because the boats are sitting out in the elements. My tinny was pristine for 20+ years. Four years in the back yard and the transom was shot.
  11. JimS123

    Just bought this pontoon from dealer, got home with no straps on back !

    A safety chain will catch the boat as it is catapulting off the trailer. Just hope its strong enough. Better than nothing. A bow tie down will keep the boat on the trailer.
  12. JimS123

    Just bought this pontoon from dealer, got home with no straps on back !

    Don't show me any of those pics or videos. I couldn't take it! My personal story was standing at a red light waiting for the signal to change. It was 12 noon on a sunny Sunday. I was in a convertible with the top down, and my prized boat was in tow. The drunk with no insurance hit me from...
  13. JimS123

    Transducer mounting - with a kicker on the starboard

    Pardon my comment. It was not meant to offend. YOU were the one that said bubblegum, not me. For a welded aluminum hull, the look of the weld is what I would expect. It looked neat and proper. Frankly I was surprised that YOU shamed the weld in the first place. To me, OEM means it came...
  14. JimS123

    Transducer mounting - with a kicker on the starboard

    Don't look at other manuals. Look at the one for your very transducer. I DID look it up. It has a 180 degree beam, so simply mount it on your existing bracket temporarily and look at the geometry. Just by your pictures, it looks like if the kicker is a problem the main will be as well...
  15. JimS123

    Anchor line/rode size

    One cannot assume any thing based on anonymous words written on an internet forum.
  16. JimS123

    Transducer mounting - with a kicker on the starboard

    What I saw in the picture was a bracket on the transom that was an OEM design. My Whaler also has a Raymarine and it was factory mounted in the same place as yours. It IS a side scan (you didn't say whether yours was or not). I also installed a kicker in the same place as yours. Obviously...
  17. JimS123

    Does EFI solve the hard start/cranking issue?

    I agree. But I left the DIY world when I retired. I have a bunch of oldies that i tinker with and run on hot Summer days, or out to the antique show. But when I HAVE to go fishing or take the family out for a Sunday cruise, I'll stick with the new stuff. If there is an issue, my local dealer...
  18. JimS123

    Does EFI solve the hard start/cranking issue?

    You're right. But as an old buddy said often: "I didn't buy a boat to save money". I believe in general, the EFIs run longer before repairs are needed. In the interim, not much to do. Remember points and plugs? But of course, anything can go wrong. In the olden days, it may have been a...
  19. JimS123

    Does EFI solve the hard start/cranking issue?

    I live in the north. My boats are idle ~6 months of the year. In olden days I used to pull out the hose and muffs and start her up in the driveway before heading to the launch ramp. Just to be sure. Now with EFI and 4-stroke, I simply put her in the water and even sitting all Winter she...
  20. JimS123

    I cannot find the right U bolts (1/2 x 4 x 3.5) anywhere

    If Fastenall doesn't have it, they are not made. If you don't have a local store, go online. I have done some custom projects and NEVER failed to find it there.
Top