Search results

  1. alldodge

    Closed Cooling System Part # 860234A1

    Your saying Alpha and Bravo and no closed cooling Your belt should be top left post 3 if it is an Alpha Your belt should be top right post 3 if it is a Bravo
  2. alldodge

    Closed Cooling System Part # 860234A1

    To attach pic, select "Attach files" bottom left of window used to enter response. Go and find where pic is at and select open
  3. alldodge

    fuel line

    Welcome To help we're going to need more info. What motor, and post pics of the of line
  4. alldodge

    Closed Cooling System Part # 860234A1

    Which belt do you have? Post a pic of the pulleys on the motor?
  5. alldodge

    Grass Cutting

    Yes, yes it's a FL thing
  6. alldodge

    Stupid question…… garboard drain plug size

    Most all are 1/2 NPT and agree, get from HW store
  7. alldodge

    Grass Cutting

    It's a vacation rental and first guess isn't for another couple weeks. It was about 8 inches in most but not all spots
  8. alldodge

    Grass Cutting

    Had to cut grass at the rental today, home still ok. It has started
  9. alldodge

    Long time lurker- and finally bought a j16 CS.need some help on the front deck.

    Welcome What does it look like under the deck?
  10. alldodge

    Valco

    Welcome It will most likely be a bit slower bit maybe not enough to notice
  11. alldodge

    454 in a 21' bowrider

    If you have a 454Mag MPI then you have 385 HP at the prop If it's a 454 MPI which would be 310 HP L29 at the prop A 350 Mag MPI is 300 HP at the prop So if your going from a L29 to a 350 MPI then the less weight will help regular running around. If you pull skiers or haul heavy loads you will...
  12. alldodge

    Can anyone help with this wiring?

    Also not sure about you one marked "not sure", unable to see where it goes but appears to be same color as the other. The other one is a ground wire
  13. alldodge

    Older Ranger Inboard

    Thanks Hey @Scott Danforth Look into a GM 305 or 350 woops, looks like scott showed up
  14. alldodge

    2013 Mercury 20 1F20201HK Leaking gas out the carb mouth (Solved)

    If you still have the old carb, might try this. Remove float and get a hair dryer or heat gun. Heat the plastic up so it will bend just a slight bit. Other then that I'm also clueless
  15. alldodge

    1992 mariner 150hp

    I don't know if this is correct but I've seen this comment on a few forums "Take prop off, lay it on a flat surface and measure the height difference between the leading and trailing edges of a blade, then multiply that number by number of blades. That will give you the pitch."
  16. alldodge

    1992 mariner 150hp

    Back of the prop is next to the nut
  17. alldodge

    1992 mariner 150hp

    Look at the back of the prop hub for numbers
  18. alldodge

    Older Ranger Inboard

    Welcome You posted in the VP section so is the drive a VP? Mentioned a Ford motor, how many cylinders?
  19. alldodge

    2013 Mercury 20 1F20201HK Leaking gas out the carb mouth (Solved)

    I don't see it in the part number breakdown but wonder if a spring should be on the needle. Found where a Gen carb has a spring installed At 2:47 you can see the spring
  20. alldodge

    2013 Mercury 20 1F20201HK Leaking gas out the carb mouth (Solved)

    Have not seen a entire plastic float until now https://www.crowleymarine.com/mercury/products/162532-float Needle https://www.mercruiserparts.com/809570002-float-valve Need maybe @Texasmark or @racerone help
Top