Search results

  1. matt167

    1989 Mariner wire harness extension

    Outboard harnesses are sold by length. So there is one out there for you
  2. matt167

    1968 Starcraft Arrow steering

    I have a 1966 holiday 14. The tin version of your boat.. what do you need to know?
  3. matt167

    9.8 hp vs 9.9 hp outboard engines

    Bigger boats vs smaller portables
  4. matt167

    9.8 hp vs 9.9 hp outboard engines

    It's not marketing in this case. In the case of Tohatsu, The 9.9 is 333cc and the 9.8 is 209cc. They are different motors. 9.9 and 9.8 both exist because of 10hp limited lakes, but between those motors, they are built for different purposes
  5. matt167

    9.8 hp vs 9.9 hp outboard engines

    Tohatsu I think started that and other manufactures followed. The 9.8hp are tuned up 8hp variants, and the 9.9hp are de tuned 15hp variants. They are sold at different price points, and weigh differently
  6. matt167

    Wellcraft 170 American underpropped?

    WOT at 5,500 would be perfect I think, but a 4 blade will get a better pull on a skiier
  7. matt167

    Big twin 40hp shear pin material?

    similar to that yes, but it's the same color all the way through, including where it sheared
  8. matt167

    Big twin 40hp shear pin material?

    I wonder if years of submersion in lake water could have changed the color?
  9. matt167

    Big twin 40hp shear pin material?

    It's non magnetic I ordered a couple OEM pins online. I was going to take the boat out this weekend but looks like light rain,
  10. matt167

    Big twin 40hp shear pin material?

    Why does the pin look like bronze? It appears to be 78,000 PSI shear strength if it is bronze? Or could it just be discolored?
  11. matt167

    Big twin 40hp shear pin material?

    So the aluminum will be out. I knew it was softer but got it because Lowes had it.
  12. matt167

    Big twin 40hp shear pin material?

    If I shear it, I'm going to have an electric or a gas motor on the bracket beside it to bring it back to the dock, where I could either pull it, fix and re launch or do it at the dock No Crocs, Gators or any other predators where I boat, so I could go swimming to do it, but I'd drop the prop...
  13. matt167

    Big twin 40hp shear pin material?

    I bought some 1/4" aluminum rod locally that I think has the right strength compared to what was there, and I bought a bunch of 1/4" brass rod online. There is no marine store local anymore, and Napa claims not to be able to get anything anymore either
  14. matt167

    Big twin 40hp shear pin material?

    prop pin. The one I pulled that was sheared, was a brass like material.
  15. matt167

    Big twin 40hp shear pin material?

    I sheared the pin on my 1966 Johnson Super Seahorse Deluxe 40hp. Must have been old because it sheared in the test barrel. Is there any 1/4" material I can cut new pins out of that is soft enough to work correctly?
  16. matt167

    New Tires For Old Gator

    Being they are bias ply, I would get a 6 ply. They will be rated to 90 PSI IIRC, but you won't need to put that in it. 50 PSI is likely enough depending on your trailer/ boat weight
  17. matt167

    Bow riders with best engine access?

    One without a sun deck
  18. matt167

    New Tires For Old Gator

    A 5.30x12 can be had in a Carslile USA Trail which is going to be the best tire you can buy. It's still a bias ply but there is a 50/50 shot it's made in the USA... Kenda Loadstar would be my second best. Carlisle Sport Trail will 'work' but they are cheeep You can find 12" rims very easy. My...
  19. matt167

    Running my boat on Land

    It's a merc sportjet. I think they have a flush connection
  20. matt167

    Intex Seahawk 3 Motor Mount Reinforcement

    Yes, it's that simple. Without it, the motor will pull itself under
Top