Search results

  1. alldodge

    Mercruiser 4.3 Alpha One problem - loses power

    Yes, maybe it's coming up as a 1988 - 1992 Can have a 2BBL or 4BBL carb 2BBL Merc carb filter item 29 https://www.mercruiserparts.com/bam/subassembly/31478/951/110 4BBL Rochester carb filter item 8 https://www.mercruiserparts.com/bam/subassembly/31478/951/130 Combo Fuel pump and filter is on...
  2. alldodge

    Mercruiser 4.3 Alpha One problem - loses power

    Give us a motor serial number and we can figure it out Might be you just need to clean the carb
  3. alldodge

    Bogging issue

    Removing the fuel line off the carb is just giving the fuel tank time to suck in some air. Your first run is 20 minutes, pulling the line off and you get 10 minutes. Open the gas cap as Scott06 mentioned, you should go back to 20 minutes If this works then as was said it's the tank vent line...
  4. alldodge

    1979 Renken Runabout Mercruiser 120 HP 4 Cylinder

    Welcome Here is your motor parts https://www.perfprotech.com/mercury-marine-parts-catalog/model/04/100/120%20%20GM%20153%20I/L4%201979-1982/5192049-thru-6229717
  5. alldodge

    5.7 GXI-H engine. Alternator problem ?

    It's correct, VP uses only one excite lead which turns the ALT on
  6. alldodge

    First Aid Kit

    For me another beer so I'll just relax a bit more
  7. alldodge

    Mercruiser 4.3 will not start

    Check voltage at coil for 12V with key ON and motor OFF. If power is not present then trace the purple wire back to the key For a quick test, run a jumper from the purple wire on the key to the coil, it should start and run
  8. alldodge

    First Aid Kit

    Thanks for the input, does seem like what I was thinking, starting with a basic kit and add other stuff as needed is an easy way to start. My current kit is getting so old I should probably toss most of it because of age and just keep the stuff which doesn't have age issues
  9. alldodge

    Changing my boat gauges.

    That could pose an issue, but appears should be easy enough
  10. alldodge

    Mercruiser 4.3 will not start

    Unless someone changed the wiring (doubtful) it has only the one purple wire powering the ignition.
  11. alldodge

    Hot ask boat seats, covers.

    It's ok just wonder now what was the new or additional question(s) or comment
  12. alldodge

    Hot ask boat seats, covers.

    ok, got to ask why post the thread?
  13. alldodge

    Hot ask boat seats, covers.

    Forget who posted it, but a member used kitchen/dinning chair covers on their boat seats and it looked great. Cost was around $8 each
  14. alldodge

    Mercruiser 4.3 will not start

    Thanks Being it's a carb it should be your key switch
  15. alldodge

    5.0l MPI Single Alarm at 2000 RPMs and higher

    Something is just not right about the motors wiring Disconnecting the "in-gear" switch (previous thread) kills the motor which should not happen. BTW, the OP can reopen the previous thread
  16. alldodge

    Mercruiser 4.3 will not start

    Welcome Could use a bit more info like a serial number to help but being a 2004 is it fuel injected ?
  17. alldodge

    First Aid Kit

    Looks like a good kit I could add a few things to to get it where I'd like. Bleed kit and air splint maybe
  18. alldodge

    1999 4.3 Gi no spark from coil & low voltage to fuel pumps

    Your correct wire to pin 85 comes from the ECM. The ECM applies a ground on this pin to energize relay and turn pumps ON Pin 85 should have 12V on it coming from the other side of the coil pin 86 and thru the coil. When relay is not energized you should see voltage on 85 until ECM applies the...
  19. alldodge

    Master Closet remodel

    My house has all cedar lined closets and built in 1969. All the smell is gone but still looks good
Top