Search results

  1. R

    1994 Force 120 Low compression on top cylinder

    Motors also need the correct prop .-----Props " attach " to the motor but " fit " the boat / type of use the boat gets.
  2. R

    1963 Johnson 18HP Not Staying in Gear

    Tried another prop ?----Could be the rubber hub slipping.
  3. R

    1994 Force 120 Low compression on top cylinder

    Water pump should have been replaced.-----Thermostat tested.----Carburetors should have been cleaned.
  4. R

    Need guidance on Prop pitch and Power, 78 Johnson 55hp 55EL78S

    Just tested a 2 cylinder motor like yours and got 150 PSI and 145 PSI compression.----And I know my gauge is good / accurate.
  5. R

    1995 Skeeter ss140 - 135 Mercury Black Max G179207 Constant Alarm

    I believe that air pressure is pumped to the main oil tank.----That pressure keeps the small oil tank full.----When motor is not running air pressure is bled off via that open fitting that goes nowhere.
  6. R

    Sea King identification

    Posting a picture might help.-----Possibly a Chrysler motor.
  7. R

    Prop Question

    Good one !!
  8. R

    Prop Question

    So many people today have very little knowledge of machinery.----Do they not teach this in grade 9 anymore ??
  9. R

    2 Forward bilge pumps?

    Looks like a good---" keep it from sinking " ---set up.------Well thought out by somebody.
  10. R

    Prop Question

    The gear ratio is 2.42 : 1 -----So at 7000 RPM the prop spins at about 2900 RPM
  11. R

    Need guidance on Prop pitch and Power, 78 Johnson 55hp 55EL78S

    So I am wrong.-----Good lick with it.
  12. R

    1993 Johnson, 200 hp help!

    There are no splines on the shift rod of this motor
  13. R

    40 hp johnson electric shift Model # 40ES 69R

    Do you not have a boat shop where you can walk in and get the correct oil before walking out ??
  14. R

    1972 Mercury 402 lower unit off but stuck in forward

    Some effort is required to turn the shift rod to get neutral.----There is a strong spring in there.----Use a vicegrip !
  15. R

    1999 75hp Fuel Prime Issue

    Any compression numbers?----Or do you feel that is a waste of time ?----What did your mechanic do for $1400 ???
  16. R

    Need guidance on Prop pitch and Power, 78 Johnson 55hp 55EL78S

    The compression numbers are way too low.-----Should be around 150 PSI.-----Test with another gauge first.----Sounds like a carburetor is flooding.----I do not believe going to an 11" pitch prop was the correct procedure here.----There is something wrong with your motor.
  17. R

    100293R Evinrude Starflite will NOT START, pulling hair out need expert help!

    Is the rotor in the correct position ?-----Does spark ( 7/16" gap ) come out of the coil ?
Top