Search results

  1. The Force power

    1996 40HP Force (by Mercury)

    There are many rectifier/voltage reg. that you can use check that place named after a rainforest p.s. I'm from Ontario
  2. The Force power

    1990 Force 120HP #2 Cyl zero compression and upon opening piston shows damage

    What is "right away" ?? As soon as you turn the key? if so; you the wire grounding somewhere
  3. The Force power

    Force 120hp won't start

    They test/ measure the jump of the spark Also make sure you are working with a; tested good battery to ensure enough RPM's while cranking the engine ( this is needed to generate enough voltage to charge-up the coils for ignition...
  4. The Force power

    Force 120hp won't start

    The float inside the bottom carb. Has this been set properly/letting fuel in the bowl
  5. The Force power

    Force 120hp won't start

    By back you mean the throat (front) ? Has the float been set-up properly on the lower one?
  6. The Force power

    Force 120hp won't start

    Nothing with the start-up of the engine Nordin asked you regarding the spark that you have not answered?!? Did you check with a spark-gap tester? or just looking for a spark?
  7. The Force power

    Force 120hp won't start

    Are the choke-plates closing when the solenoid is energized/ ignition-key pressed in?
  8. The Force power

    Force 120hp won't start

    You may not need a complete carb repair-kit, just a few parts out of it. MOST parts are available http://www.crowleymarine.com/mercury-outboard/parts/1544_7.cfm ALSO..............You may want to follow the advice below; Here's the old post (from the late Frank) that I have printed out & live by...
  9. The Force power

    Force 120hp won't start

    the piece of metal that holds the vliegwiel & crank in place (preventing to spin on each other)
  10. The Force power

    Force 120hp won't start

    Sleutel :D
  11. The Force power

    1990 Force 120HP #2 Cyl zero compression and upon opening piston shows damage

    Did you check the fuel-pump? ALSO... Here's the old post (from the late Frank) that I have printed out & live by; 1.Disconnect the ball link to the carb cam at the timing tower. Disconnecting at the cam risks bending the cam. Move the cam away from the carb roller. 2. Loosen the screw(s) on the...
  12. The Force power

    CDI

    I don't know.....likely not
  13. The Force power

    CDI

    Yes, you can but may have to change the plugs/connectors on the ends
  14. The Force power

    1988 force 85 wiring?

    My guess......random parts thrown on to sell as "complete"
  15. The Force power

    1988 force 85 wiring?

    Here's the wiring for the 3 cylinder disregard all other wires on your motor as Nordin said; it is set up for a four cylinder Also the Flywheel nut is missing; check for the key
  16. The Force power

    1993 Force 50hp 2cyl 2 stroke What in the Jerry Riggin'?

    Oh Jerry, you know I take your words/advise as Gospel
  17. The Force power

    1993 Force 50hp 2cyl 2 stroke What in the Jerry Riggin'?

    Well, let me tell you..........................the Jury is still out on Jerry :D
  18. The Force power

    1990 Force 120HP #2 Cyl zero compression and upon opening piston shows damage

    Thank you Jerry, If I replied with that answer; it would of been bashed.
  19. The Force power

    1987 force 125 plug wire question

    Can you show us a few pics. are these aftermarket coils?
  20. The Force power

    1993 Force 50hp 2cyl 2 stroke What in the Jerry Riggin'?

    I think this story is.........rigged :D
View older results
Top