Search results

  1. dingbat

    Yamaha 150 Rigging Tube

    Goggle Yamaha rigging grommet
  2. dingbat

    Teleflex sterring

    I suspect the part number for your old part is actually SSC7212.
  3. dingbat

    Spring replacement?

    What’s your issue? Have torsion on a boat and two horse trailers. Oldest will be 25 yro in August
  4. dingbat

    Spring replacement?

    https://www.easternmarine.com/double-eye-trailer-leaf-spring-una-188
  5. dingbat

    Installed trim tabs and fish finder transom mount.... how do I know if it's leaking?

    Now that would make me worry…….5200 is high viscosity adhesive. Not designed to be used as a thread sealer. The installation instructions for my trim tabs specifically said to use marine epoxy.
  6. dingbat

    200 HP Evinrude/Johnson Carb Kit and Rebuild

    Hey, it’s worth a try. Got nothing to loose
  7. dingbat

    What trailer length

    Post #30 is from someone who works/worked for a trailer manufacturer at one time or another It's interesting in the first page of the NATM manual mention above contradicts his statement on the governing body. "This information document or Guidelines merely highlights the major requirements...
  8. dingbat

    200 HP Evinrude/Johnson Carb Kit and Rebuild

    No hoses 4 bolts on top throttle bodies. 2 bolts on lower throttle bodies Just googled the part number 0332319. Turned up 3 pages of results See post #16 I counted the number of turns each screw was out on disassembly. Shop manual give you a “base” number of turns. It started and ran no...
  9. dingbat

    What trailer length

    Never heard of such a thing. Is that a State Law? Mine has to be pushing 6’
  10. dingbat

    Hard start but runs great once started

    Sounds like it's running on one cylinder
  11. dingbat

    Transom Hardware sealing issue

    I used Marine Tex on all my hull intrusions Not sure why you used a "lag bolt". Much more contact area (strength) using wood or sheet metal screws. If I remember correctly, the ladder of my old boat was installed with #14 screws. 316 stainless "screws" are readily available Use recommended...
  12. dingbat

    E bikes

    Volts x Amps = Watts 120V x 10A = 1200 W 1 HP = 745.7 W 350W @ 36V = 9.7A 750W @ 36V = 20.8A Battery 36V x 13A
  13. dingbat

    Transom Hardware sealing issue

    Most grades of stainless steel, 316 is the exception, "rusts" when deprived of oxygen. Given the situation, wouldn't be surprised at all the 5200 hasn't trapped moisture between the bracket and hull. 5200 has a nasty habit of drying out and shrinking, causing leakage and entrapment of...
  14. dingbat

    E bikes

    Starting /in rush current of an DC motor is 5-7 times more than run current.
  15. dingbat

    nice show...great location

    Ya, reconciled the sailing center behind you Used to go just every year before it became a "thing". Kept the boat at a marina on Spa Creek. Anchored up in the shade of the Rt. 450 bridge.
  16. dingbat

    Good spray on weed killers.

    I can vouch first hand it doesn't kill yellow jackets, hornets or wasps living in fence rows.......
  17. dingbat

    nice show...great location

    Looks like Severn River
  18. dingbat

    Housekeeping PSA

    What system are you using that requires multiple units/sensors? The ones I’ve looked at monitored flow rates from a single, whole house point
  19. dingbat

    Battery Cables

    Put new battery cables on my 200 hp last year. The 6’ OMC positive cable was 4 gauge. Best place I’ve found for making custom cable assemblies https://www.customcableusa.com/
  20. dingbat

    200 HP Evinrude/Johnson Carb Kit and Rebuild

    I would rather spend an hour, hour and a half every 5-6 years changing gaskets than spend almost $250 a tank (150 gallons) more for E0 at the marina and then have to deal with moisture issues again. There are gasketed pockets for the mixture screws on the side of the throttle bodies. Plates...
Top