Search results

  1. Scott Danforth

    2008 bayliner 192 discovery

    Your tach is off. The motor would grenade at 5700 RPM
  2. Scott Danforth

    Has anyone replaced the windshield on their boat?

    Check with Taylor Made However on curved windows. Be prepared when you get the quote. A new window may cost what you paid for the boat
  3. Scott Danforth

    2008 bayliner 192 discovery

    You pick the prop by which one gets the motor to the proper WOT RPM. NOT by the planing RPM
  4. Scott Danforth

    1999 Volvo penta 5.7 GSI stuttering/cutting out - temp gage

    For $13 you can get new distributor bushings from NAPA
  5. Scott Danforth

    Electric boat maker shutters plant in WV

    X shore is in Sarasota.... The boat has come in under tow almost every outing. Another brand used a Tesla battery. They had a leak into the bilge and the battery caught on fire The technology isn't there yet
  6. Scott Danforth

    Need to vent....

    Since you are drinking Natty...... Going to assume it's a head injury
  7. Scott Danforth

    Four Winns H190 Trailer bunks

    Because the chemicals in pressure treated lumber will dissolve the aluminum in a very very very short time . You will have holes in the hull in a few weeks
  8. Scott Danforth

    Four Winns H190 Trailer bunks

    You can. Use plastic pads vs carpet. But the bunks themselves need to be lumber Cypress is really good. Never use pressure treated with aluminum boats
  9. Scott Danforth

    Starter Slave Solenoid

    Follow the yellow with red stripe wiring from the starter.
  10. Scott Danforth

    evinrude/johnson v8 buying

    Many parts are NLA. May be easier finding EFI parts for a Ford powered Mid 90s OMC IO than parts for one of the old Johnnyrude V8s
  11. Scott Danforth

    2018 rinker ex32

    Depends on the slide bolt. Some are a set screw with a locking nut. Some are just a set screw Some do not have a friction screw
  12. Scott Danforth

    2018 rinker ex32

    Is there a friction screw on the slide bolt?
  13. Scott Danforth

    76 OMC 175 starting

    Did you pre-fill the fuel filter? Cranking about 10 seconds would do it if you pre-filled the filter If not. Crank for 20 seconds, rest for a minute. Repeat as needed.
  14. Scott Danforth

    Changing throttle styles

    grab base of throttle handle and pull outward
  15. Scott Danforth

    All gauges went out. What to look for?

    dash gauges may have a separate fuse than the rest of the ignition. all the gauge power and grounds are daisy-chained together. check for good voltage on the gauge power (should be purple) check for good ground on the gauges (should be black) loss of ground would have the gauges reading...
  16. Scott Danforth

    Where is the fuel tank vent 2014 Tracker 17.5

    if you do not have a silver looking mini clamshell or round looking vent within 12" of the fuel cap its in the cap assembly
  17. Scott Danforth

    Need to vent....

    you may need to wrap your cars in bubble wrap.....
  18. Scott Danforth

    What level of corrosion is acceptable?

    the boat is an I/O boat. there would not be a splashwell. the I/O cutout is still there. looks like the boat is in the middle of a transom rehab. if all the drive bits are there, and all the trim, may be worth a few beer tolkens. however as it sits as a project. its scrap value is about...
  19. Scott Danforth

    Deck padding for Sunfish or similar sit-on-deck dinghies?

    I looked later, and one site sells up to 4" thick.
  20. Scott Danforth

    What level of corrosion is acceptable?

    None of us can upload photos directly currently. there is a server issue preventing us, and the moderator team has reached out repeatedly to the hosting admin, however you can link them from a google pic account or similar.
View older results
Top