Search results

  1. Scott Danforth

    Another Motor mount repair question

    do a test drill into the stringers, about a 5/16" drill, mark off the drill with tape to only drill 1/2". drill up about 2" from the hull.
  2. Scott Danforth

    Need help

    That's how Godzilla, mothra, and the smog monster are created
  3. Scott Danforth

    Another Motor mount repair question

    Finding them is easy, getting them to put down the video game controller and be interested in hard work is the challenge
  4. Scott Danforth

    Replacing U-joints Alpha one gen 1

    It's your thread.... You can post as often as you want and when you want
  5. Scott Danforth

    Getting challenging to find somewhat common items?

    the town I grew up in had 4 bars on nearly every corner. at one point, the most bars per capita in the world. that was about 173 bars for a town of 39,000 people. then there were every grocery store (selling liquor) every liquor store and every gas station selling beer.....not sure you can...
  6. Scott Danforth

    Hydraulic Steering for Sterndrive

    yes, that is how most of the power steering I/O boats are done
  7. Scott Danforth

    Elgin needle bearings

    thats soliciting parts which is against the rules.
  8. Scott Danforth

    Elgin needle bearings

    I never said cage. however bearing houses do not just sell the rollers. they sell the rollers and the shell that is pressed into the housing.
  9. Scott Danforth

    Getting challenging to find somewhat common items?

    there are about 400 filters that will screw in where the delco curerntly fits. its a 13/16-16 thread, 3-9/16 OD gasket is 3" ID x 3-3/8" anti-drain back 25-30 micron rating I personally dont like the shorter filters, as they load up and bypass way too soon Wix 57099 would be my preference...
  10. Scott Danforth

    Elgin needle bearings

    you need to buy a whole bearing with the races from your local bearing house. not just the needle rollers should be numbers on side of bearing
  11. Scott Danforth

    Hydraulic Steering for Sterndrive

    something is not right. I have 450hp going to my mid 80's drive and steering without issue. However I have the power steering actuator I would just get the power steering version of the drive actuator for the 270, 275, 280, 280 drives . only the small 4-cylinders should have gotten manual...
  12. Scott Danforth

    Another Motor mount repair question

    Never had a fiberglass boat that was just the transom and motor mounts. stringers and flotation boxes at a minimum. watching the forums, most are a full gut-n-restore being a 1988, you will most likely find lots of water logged foam going forward about 6-8 feet from the transom. you may get...
  13. Scott Danforth

    Boat age vs financing.

    you can finance a truck.....🤣
  14. Scott Danforth

    2007 to 2008+ 4.3L Mercruiser Swap

    there are billet aftermarket front covers without the sensor if you really want.
  15. Scott Danforth

    2007 to 2008+ 4.3L Mercruiser Swap

    if your motor is carbureted, the sensor is not used.
  16. Scott Danforth

    Boss's boat.....worlds fastest v-hull

    Technically my Boss's Boss..... If you guys are into fast boats.... this years shoot out is this week. https://lakeoftheozarksshootout.com/2024-shootout-events/ Good luck to Jim and the team.
  17. Scott Danforth

    No fuel in carb despite several attempts to crank

    click on this one. https://forums.iboats.com/threads/must-have-technical-information-for-diyers.335378/
  18. Scott Danforth

    Boat age vs financing.

    there is no one perfect boat, however if you have 7 or 8, you can have the right boat for the right conditions.....
  19. Scott Danforth

    evinrude/johnson v8 buying

    The issue with a 2-stroke in a car, is that when you decelerate in traffic, you loose fuel flow, therefore loosing lubrication. that is what killed the Saab Sonnett. a few of them have been put into cars, however none are really viable vehicles as they all have issues. I say, if you can...
  20. Scott Danforth

    2007 to 2008+ 4.3L Mercruiser Swap

    the sensor is plugging the hole the reluctor tooth wheel is acting as a spacer for the damper all the timing covers from 1996 and later have the sensor hole in them.
Top