Search results

  1. alldodge

    Prop seals Bravo 3

    Getting that one out was a real bear, manual shows using a 3 jar slide hammer. I used a drift to know it out from the back side. It tore the seal up and note manual says to use locktite to reinstall. In my thread I used a hose clamp and old seal to reinstall
  2. alldodge

    Break out the dramamine.

    Flat bottom gets tippy, round bottom is even worst. Was on a USCG ice breaker WAGB 283
  3. alldodge

    Casting numbers help omc cobra 5.0 HO motor thought 1993

    Welcome Moved to OMC to get more eyes on it
  4. alldodge

    Closed Cooling System Part # 860234A1

    Not required, look closely at the closed cool Pic, it just needs one additional idler pully and a slightly longer belt
  5. alldodge

    Closed Cooling System Part # 860234A1

    If I I understand you correctly , you need to use belt arrangement post 4 bottom right. Meaning you need another bracket to move belt lower on the top
  6. alldodge

    Closed Cooling System Part # 860234A1

    The Pic u posted does not show a HE
  7. alldodge

    Closed Cooling System Part # 860234A1

    Ok you have belt installed as it should be. With it still slipping them need to know what is the part number of the belt being used
  8. alldodge

    Closed Cooling System Part # 860234A1

    Your saying Alpha and Bravo and no closed cooling Your belt should be top left post 3 if it is an Alpha Your belt should be top right post 3 if it is a Bravo
  9. alldodge

    Closed Cooling System Part # 860234A1

    To attach pic, select "Attach files" bottom left of window used to enter response. Go and find where pic is at and select open
  10. alldodge

    fuel line

    Welcome To help we're going to need more info. What motor, and post pics of the of line
  11. alldodge

    Closed Cooling System Part # 860234A1

    Which belt do you have? Post a pic of the pulleys on the motor?
  12. alldodge

    Grass Cutting

    Yes, yes it's a FL thing
  13. alldodge

    Stupid question…… garboard drain plug size

    Most all are 1/2 NPT and agree, get from HW store
  14. alldodge

    Grass Cutting

    It's a vacation rental and first guess isn't for another couple weeks. It was about 8 inches in most but not all spots
  15. alldodge

    Grass Cutting

    Had to cut grass at the rental today, home still ok. It has started
  16. alldodge

    Long time lurker- and finally bought a j16 CS.need some help on the front deck.

    Welcome What does it look like under the deck?
  17. alldodge

    Valco

    Welcome It will most likely be a bit slower bit maybe not enough to notice
  18. alldodge

    454 in a 21' bowrider

    If you have a 454Mag MPI then you have 385 HP at the prop If it's a 454 MPI which would be 310 HP L29 at the prop A 350 Mag MPI is 300 HP at the prop So if your going from a L29 to a 350 MPI then the less weight will help regular running around. If you pull skiers or haul heavy loads you will...
  19. alldodge

    Can anyone help with this wiring?

    Also not sure about you one marked "not sure", unable to see where it goes but appears to be same color as the other. The other one is a ground wire
  20. alldodge

    Older Ranger Inboard

    Thanks Hey @Scott Danforth Look into a GM 305 or 350 woops, looks like scott showed up
Top