Search results

  1. alldodge

    FUEL PUMP

    Correct https://www.ebay.com/itm/115175190307
  2. alldodge

    Mercruisier 7.4 litre gas pressure

    Been thinking about this pic This is a block diagram pic to make the system more clear of how it works. Example: the fuel pump is behind the plate, so Reg is also shown separately
  3. alldodge

    Mercruisier 7.4 litre gas pressure

    That's the correct Reg Things don't add up and I would look at bench testing the Reg. Apply air pressure of bottom of Reg with adjustable air Reg. Slowly bring air pressure up to see it should open at 43 psi. Reduce air and then with a hand operated vacuum pump apply vac to port and bring...
  4. alldodge

    Stainless riser fitment help.. with numbers

    Putting stainless and cast iron together is not a good idea in salt. There are mitigation methods I'm not finding enough info on what you currently have to comparing what your wanting to use. Original elbow shows 90*, the part number 816900 is no longer made but I'm finding it's used on V8...
  5. alldodge

    1957 Canadian Challenger rebuild

    Wow very nice job
  6. alldodge

    Digging stumps

    Pic doesn't show it justice, but dug down another 2 foot all around with hoe. Then 955 broke it loose. Now need to see if it can lift it out. First try, it's not happening. Will see what happens with more thought
  7. alldodge

    2003 Mercruiser 4.3 TB-V No Spark

    Take it back and get a refund
  8. alldodge

    Trim too high to start engine

    Hey that's good to know, thanks May be able to pass along some day
  9. alldodge

    New Boat Launch Ramp

    I like the looks of how it's starting. Going high so they can get more angle to drop in. Just hope they can keep it from filling back in over time
  10. alldodge

    2003 Mercruiser 4.3 TB-V No Spark

    Might mention it to Merc Tech support Was the sensor bought from a major seller of Merc parts or Amazon sell everything kind of place? And many thanks for the update
  11. alldodge

    Digging stumps

    The KY to PA would be a tad bit far for me ;) Yep, but I might be the guy on Red Green show with that stuff :D
  12. alldodge

    Dealing with bogging for too long and need help because I've done just about everything!

    Yes, that's the knock sensor
  13. alldodge

    Digging stumps

    Buddy needed some stumps and trees removed for his new home. Sure I can do that, haven't used my 955 in a few years and machinery does need to be used Geezers, it has been fun pushing down trees, but dang, get into a old large white oak and I seay yes, but tree just smiles. Worked on this 3...
  14. alldodge

    Bought wrong prop

    Did find (on scream and fly) where a few folks used a one inch hole saw and cut out part of the hub to fix for OMC. Do look into this
  15. alldodge

    Bought wrong prop

    No expert but most just need a different hub kit Did find a 200 and 201 which difference is up to 1990 and after 1990 Can also get your old prop fixed
  16. alldodge

    5.0GL fuel small leak near the water fuel separator and possible starter solenoid issue

    If you smell gas, you have a gas leak and it needs fixed If no gas can be smelled, it's probably just water and your ok, but do keep checking
  17. alldodge

    8.1 GXI-J Cranks but No Start w/ Diacom Logs

    Yes, if incorrect gaskets were used or the exhaust mans, risers or elbows were not flat on gasket surfaces.
  18. alldodge

    Mercruisier 7.4 litre gas pressure

    If it's connected to the rear of the fuel rail then it's item 5 and is called a fuel Reg. The unit is more a damper then a Reg but that's what it's called https://www.mercruiserparts.com/bam/subassembly/31918/2705/130 The Boost reg in your first pic I don't know what that would do. The Reg on...
  19. alldodge

    Wiring question for 4.3l Merc

    One side of power to the ALT comes from the 50 amp breaker and before the motor plug. The excite voltage (purple wire) comes from the key and thru the motor plug
  20. alldodge

    Wiring question for 4.3l Merc

    Some motors have an additional fuse on the motor, but if it's not there then there is a broken connection. Pin 5 on the engine plug is what powers the motor,
Top