Search results

  1. dingbat

    NMEA newb looking to upgrade electronics.

    Don’t know of any domes that you can mix and match between manufacturers. Don’t know why you would want to. The data transfer rate NMEA 2000 is slow. Designed to transfer (sensor) updates. Not fast enough for video or real time streaming data which is typically done via Ethernet
  2. dingbat

    Boat Wiring Help

    With no charge capability, I don’t understand the need a 1/2/both battery switch, let alone two on that setup. TM goes on one stand alone battery. The general purpose will work but not the best choice. Not good at deep cycling. Everything else on the other battery. Install a on/off switch if...
  3. dingbat

    Phase Combiner + Being Bored

    Dino fart…..no shelf life
  4. dingbat

    NMEA newb looking to upgrade electronics.

    The whole idea behind the NMEA 2000 standard is to make things “plug and play” between brands. Having said that, make sure the units and components atr NMEA 2000 “Certified”. Lots of stuff out there that is NMEA 2000 “compatible”. Not what you want. As far as equipment is concerned, depends...
  5. dingbat

    Marine oil VS Standard Synthetics

    https://forums.iboats.com/threads/what-type-of-oil-and-lube-to-use.752168/post-5727314
  6. dingbat

    Live well

    I believe what we have is a difference of terminology. What your describing is a seacock or a ball valve Check Valve: A flow control device which only allows fluids to flow in one direction. Typically spring loaded and mounted in-line. The anti-siphon valve is the fuel tank is the perfect an...
  7. dingbat

    Live well

    Sounds dangerous... how do you keep marine growth from fouling the check valves?
  8. dingbat

    transducer cable

    Should be a rigging tube under the deck somewhere. How did they bring the engine wire harness to the helm
  9. dingbat

    transducer cable

    What is your problem?
  10. dingbat

    Floor seating--options other than beanbag chairs?

    Not sure how that plays into furnishing his basement play room ;)
  11. dingbat

    Live well

    Have never heard of nor seen a “check value” on a thru hull with the exception of the ping pong ball scuppers of which I’m not a fan for a variety of issues Any intake (thru hull) below the water should have a sea **** or on-line ball valve installed.
  12. dingbat

    Tohatsu MFS60 ignition wire and NMEA2000 not active on bus

    Guessing the tach includes the A/D circuitry for the tach signal
  13. dingbat

    Pitting/corrosion on jon boat bottom

    Signs would not be tin. Tin is a very soft material. Aluminum is stable with a ph between 6.4 and 8.5 To “clean” need a product outside these limits. Take what you read on the internet about aluminum cleaning with a grain of salt. Don’t tell them producers (mills) acid clean using...
  14. dingbat

    Sticky timing base '96 Evinrude 200TXEDR

    Voltage doesn’t tell you anything except the regulator has not failed outright. The goo (insulator material) is proof the stator has been overheated working beyond its capacity. Bad battery(s) and or loose connections are the usual suspects. With the VR pushed to capacity, it’s only a matter...
  15. dingbat

    Sticky timing base '96 Evinrude 200TXEDR

    Need to replace cam roller with new part. Can’t do link and sync w/o 1500-1600 rpm idle on a hose is normal. 700-750 rpm in water, in gear There is no “cleaning” up a failing stator. If the stator has “melted” it needs to be replaced
  16. dingbat

    Swell, waves, and period

    Huron? Wife’s family has lived within eye sight of the lake for five generations. Fished out of Port Sanilac and Lexington many times over the years.
  17. dingbat

    Swell, waves, and period

    By definition, the phenomenon of swell can not be truly realized even in the largest lakes. I believe the phenomenon of which you speak is called Seiche
  18. dingbat

    Early 80’s merc 2.0 150 V6 brown band clamshell black max ratio

    Lever on the bottom releases the front cover to expose the release catches. Covers hinged on he back
  19. dingbat

    Early 80’s merc 2.0 150 V6 brown band clamshell black max ratio

    Your looking at mid 1980’s. My 175 HP brown stripe was an 1986
  20. dingbat

    2003 yamaha 150txrb oil lines

    It’s not a application specific hose but they use a specific hose for the application. I went through this exercise a while back. Couldn't find a SAE number on the OE hose. Played it safe and ordered OE quality hose. Rather spend a couple of extra bucks than take a chance on the quality of...
Top