Search results

  1. Scott Danforth

    1976 Montego 16- The "Free" Puppy

    The most expensive boats in the world are free. Good luck bringing it back to life
  2. Scott Danforth

    260 hp

    Welcome aboard You don't state what year, so we cant determine prop rating vs flywheel rating. However you motor would have 260hp if it is in perfect condition Is the question how much HP can you get from the SBC engine, or how much HP you can put thru the drive? Which drive? Which SBC?
  3. Scott Danforth

    New Splashes

    Any other splashes?
  4. Scott Danforth

    1970's Boston Whaler Hull Type

    What does the paperwork say it is?
  5. Scott Danforth

    Mercury Outboard identification help

    Rebuild the carb. Do not replace a perfectly good carb with a junk one. Use the serial number to order parts for your 1983 or 1984 motor
  6. Scott Danforth

    VP DP-SM drain screw leaking

    Get same OD with a 2mm cross section
  7. Scott Danforth

    48 years...

    flip the helm on the steering check the hub on the prop
  8. Scott Danforth

    Neutra-Salt: Connect to power steering cooler?

    FWIW, the Neutra Salt aftermarket kit has a T-fitting you splice into the raw water line feeding the raw water pump.
  9. Scott Danforth

    Top Secret File

    Just an FYI. a few years back, when iBoats switched forum software from VBuletin to Xenforo, some of the links went Phhlllbbbtttt during the migration. the moderator team has been busy fixing many links for the past few years. if there is something specific you are looking for. Just post in...
  10. Scott Danforth

    Paint

    agreed, paint doesnt hold up like gel coat when matching gel coat, remember, the new gel will fade at a different rate than the old gel. there are also 90 versions of white. have you looked at the spectrum repair kits? https://spectrumcolor.com/collections/patch-paste-kit
  11. Scott Danforth

    VP DP-SM drain screw leaking

    https://www.mcmaster.com/products/o-rings/
  12. Scott Danforth

    Bravo 3 driveshaft pinion bearings 8M0104358

    or pull the whole thing apart, inspect everything, then buy what you need as you will be able to read the bearing numbers, seal numbers, etc.
  13. Scott Danforth

    G3 1610 prep charges?

    first, welcome aboard next, you can negotiate the price on the package. there are manufacturer incentives to sell old inventory, since the 2024's are coming out, the 2022 is almost 2 years old. and yes, many boats under 25 feet are dealer rigged because they are manufactured like they come...
  14. Scott Danforth

    VP DP-SM drain screw leaking

    that o-ring is too small for the groove that looks like a 1.25 mm diameter o-ring jump up to a larger cross-section
  15. Scott Danforth

    I am looking for a real manual on my boat by hin number.

    first, welcome aboard second, what information are you looking for? if you have a new(er) bayliner. you can get the generic manuals. https://www.bayliner.com/us/en/owners-corner.html if you want, you can get a factory service manual for your motor/drive from the manufacturer of the...
  16. Scott Danforth

    Boat listing to left

    being a 1988, I guarantee there is wet foam in it on the port side unless you just did a restoration. there probably is also a hook did you drill-test the stringers on the port-side of the bilge?
  17. Scott Danforth

    Neutra-Salt: Connect to power steering cooler?

    Thanks for coming back to this and updating it.
  18. Scott Danforth

    1990 5.7L L.E. OMC Cobra - Various Questions

    Merged the threads here. Only one thread per topic
  19. Scott Danforth

    Old aero craft

    See this in post #2 I have found that many times you need to go in, in-person and talk to them
  20. Scott Danforth

    1969 Boston Whaler hull peel

    The 08 is CSM stitched. I would use poly over epoxy because epoxy isn't worth the extra cost.
Top