Search results

  1. R

    Rectifier question for 1984 Evinrude E140TLCRD

    As I stated earlier it is clearly visible , partially under the flywheel.----In the 4th picyure !!
  2. R

    1996 Evinrude 40hp - Will not idle, 6mph WOT

    What fuel pump is on this motor ?----Sounds like it is running on 1 cylinder.----Does spark jump a gap of at least 3/8"?
  3. R

    1988 48 hp prop shaft bearing carrier

    ----Find ----evinrudeparts.ca-----They may be able to help you.------What motor did this 320037 part number come from ??
  4. R

    Checking Pts without Removing Flywheel CD-18

    ???----Find the point of maximum opening.----Adjust it to 0.020"------There is nothing simpler in my opinion.-----Brilliant that you can do this kind of maintenance at your remote cabin without any special tools.
  5. R

    why are my posts disapearing

    Management does not like people hunting for free stuff I think. ---???
  6. R

    86 mercury 90 hp inline 6 started rattling at idle

    Checked flex plate on the flywheel for cracks ?-----Stainless prop ?----If so take it off and test run.
  7. R

    1964 Johnson 60HP V4 Carb adjustment

    Plug wires are screwed into the cap.
  8. R

    1999 115hp evinrude ficht

    The oiling system must be ready and in service before you can start this motor.----And no , mixing oil in the gas does not work in this motor.
  9. R

    Yamaha 50 2 stroke rebuild questions

    O/S factory pistons are listed as NLA.----New factory crank assembly is about $1200.----So check availability of parts in your area first.
  10. R

    1999 115hp evinrude ficht

    It should start and run on 3 of 4 cylinders.-----Have you primed the oil system ?
  11. R

    Shifting problem

    Read post # 7 again.
  12. R

    Shifting problem

    Lower units are often removed with control in neutral.----Then the lower unit jumps into forward.----After assembly it does not work.----The head scratching starts.----But wait this is a common mistake.----Find the tutorial at the top of MERCURY forum.----Follow it and resolve this.----No need...
  13. R

    1979 Merc 7.5hp oil mix

    Mix is 50:1----Is your tank volume in US gallons or IMP gallons ?---400 ounces requires 8 ounces of oil.------And ~500 ounces takes 10 ounces of oil.
  14. R

    Do you make your own gaskets ?

    All the time.----Made a fixture to punch neat clean bolt holes.
  15. R

    Water pump

    A rubber seal fits in outlet of the pump !
  16. R

    No aluminum model # plug on this powerhead.. Old 2 cylinder. How to identify??

    Most parts have a 6 digit casting #.----What # do you find on the cylinder head?----What size is the carburetor opening where it fits on the intake ?---Any # on the upper carburetor body ?
  17. R

    1971 Evinrude fisherman, not pumping water

    The 5-1/2 was fitted with a thermostat in 1959 model year.
  18. R

    What do I do??

    Your location ?
  19. R

    Please help, no spark and so lost

    Some have an optional battery charging coil under the flywheel.----There is no need to use a drill when testing for spark.
  20. R

    1971 Evinrude fisherman, not pumping water

    Back in the day we had J4J ( J4C ) for motors with a thermostat.----J6J ( J6C ) for motors without a thermostat.----No idea why anyone would want to run J8C in one of these simple motors.-----The ignitions on these are simple and easy to keep in good condition !
Top