Search results

  1. Scott Danforth

    Hot rod/mods

    This is a family friendly site with global reach.
  2. Scott Danforth

    Hot rod/mods

    not without blowing up or hydrolocking first.
  3. Scott Danforth

    Cool battery charging cord I’ve been using

    my battery charger would turn that 14 gauge chord into charred dust. I would suggest something along this https://www.amazon.com/Battery-Connector-Connect-Disconnect-Trailer/dp/B00YOFBSF8/
  4. Scott Danforth

    Fiberform hin number problem

    first, welcome aboard second, that could be a pre 1972 serial number third, if you are trying to decipher your boat without a title/registration/bill of sale, it may simply be a yard planter
  5. Scott Danforth

    Hot rod/mods

    no issue if you understand that everything used to hot-rod a car stays in the automotive world, and hot-rodding a boat is like building a dump-truck to climb a hill of sand in 4th gear while pulling a trailer. the boat in my sig is a perfect example of hotrodding.
  6. Scott Danforth

    No Crank - No Start on New Engine Swap First Startup

    make sure the controls are in neutral and you dont have a MOB switch tripped
  7. Scott Danforth

    Sterndrive multiple leaks

    my guess the water supply tube or the water pump is leaking heavily for water to stream out the drain holes.
  8. Scott Danforth

    Alpha 1 Gen2 Trim drops when under power

    I would pressure check prior to buying parts.
  9. Scott Danforth

    97 SeaRay 175 project boat hull weeping question

    HDPE has no strength, for it to be used, there needs to be more structure underneath
  10. Scott Danforth

    97 SeaRay 175 project boat hull weeping question

    there is a gel coat side. there is no starboard side. what you are finding is nothing special or new. most boats older than 15 years start to have issues. your boat is 27 years old.
  11. Scott Danforth

    97 SeaRay 175 project boat hull weeping question

    there is a core to your deck, but your 1997 is not much different than the 1995 in link 14 in the DIY stickies.
  12. Scott Danforth

    Automatic bilge pump brands using non-mechanical sensing?

    mechanical float switch is nearly bulletproof
  13. Scott Danforth

    97 SeaRay 175 project boat hull weeping question

    see post #3
  14. Scott Danforth

    Outboard Mounting Height

    Start with the motor mounted to the transom, and level. from there, the AV plate is about 1" above the keel. then see post #6
  15. Scott Danforth

    alpha one w/485 srt 4cyl alinement issue

    you dont need a section of pipe if you have the alignment tool. look at the aft mounts
  16. Scott Danforth

    alpha one w/485 srt 4cyl alinement issue

    No. That is not what I said. You asked in post #1 if you needed to install a new bearing so it will align better. I stated No, your current bearing should move, and part of the alignment procedure is to move the bearing with the tool A few things that could cause what you are seeing...
  17. Scott Danforth

    alpha one w/485 srt 4cyl alinement issue

    The process of alignment is to insert the tool and smack it to move the bearing up/down etc prior to fully inserting
  18. Scott Danforth

    '98 Stingray 190LX 4.3 Merc Stuck in Muck Issue

    Without water, the gauge is not accurate. If water was sizzling, temp over 220
  19. Scott Danforth

    alpha one w/485 srt 4cyl alinement issue

    The gimbal bearing moves.
  20. Scott Danforth

    Sun tracker 22 regency

    Check for water in the toon logs
Top