Use Google, or if you want to pay more, go to volvopentastore.com and go thru the menu to get the Volvo part number. We will point you to the answer, we won't spoon feed you the answer
the oildyne pump used in trim cylinder installations uses cross-port check valves for load holding. the down pressure is set to about 900 psi and the up pressure is just shy of 2500 psi. (because the area of the piston on the blind end is bigger than the rod end and the prop helps push the...
got a pic? sounds like a pedestal seat without a pedestal.
below offerings from springfield, Attwood and TACO
https://springfieldgrp.com/products/removable/
http://www.delzer.com/oneasg/Attwood-Marine-Products-Collection-2021/194/...
to replace the transom and the seats is a sheet of 3/4" ACX exterior plywood and some tite-bond III glue.
laminate 2 pcs together for the transom, use 3 pcs for the seats.
its a weekend job.
I ran a comp cam double roller set. there literally are about 200 different sets that fit and will work for an SBC.
the stock timing set is the cheapest thing that GM could stuff in the motor from either Mahle or Melling (both supply GM). I personally prefer to spend a little more on the...
Videos at sterndrive info. There are potentially a dozen places that can cause a leak
Based on color, it's a hydro/mechanical lower vs the mechanical only (silver)
Maybe @kenny nunez
Go on searays web site. Go to the support tab. That is all that exists in the boat side.
The motor and drive service manuals are available only from the engine manufacturer. Most likely Mercruiser. (Publications.Brunswick.com)
