Search results

  1. alldodge

    FLYWHEEL HELP!!!

    Why not remove and Replace the ring gear
  2. alldodge

    Leak from "Lower/upper shoe"??? HELP!

    Everything is easy for those that have done it a few times and have the necessary tools. A first timer needs to read up on what is needed to do the task. Pull the drive first and find out what is needed then we can provide more thoughts. To pull, move throttle handle full forward gear...
  3. alldodge

    Leak from "Lower/upper shoe"??? HELP!

    It isn't done anymore but back in the day Searay did it for the looks. It is a Merc Alpha 1 drive that has been painted with decals. There is a guy here with a real nice 21 ft Pachanga
  4. alldodge

    Solar Power Installation . . .

    Not to sure a dc/dc would work. Takes power to run and just how much is not specified. How much of the 100 watt (on a sunny day max) would be used to produce enough to charge the others. Understand its being powered from the single Bat that is being charged by solar panel, but anything above...
  5. alldodge

    Leak from "Lower/upper shoe"??? HELP!

    If its leaking from above then its coming from then most likely its coming from the drive shaft bellows. The above area is where the exhaust exits. The shift shaft goes up where the shift cable and drive shaft come together. If the bellows has oil in it then the upper drive shaft seal is...
  6. alldodge

    Solar Power Installation . . .

    The panel looks a bit larger for the Arch. Might think about another location, Maybe on the morning cover
  7. alldodge

    Mystery Engine Alarm

    I think the lights behind the Tach is just where they are positioned, doesn't mean anything. Would sure like to know what the code was the Mech read on the scanner. The impeller missing a blade was in need of replacement but getting the same alarm, it needs to be investigated further. Most...
  8. alldodge

    Mystery Engine Alarm

    Where do you see the numbers blinking? What motor 300-ca isn't enough serial numbers are best
  9. alldodge

    Intake warning sound for one second

    I'll assume its a Merc because its posted in the Merc section. Doesn't matter what the boat is but do need to know what motor and serial numbers are best? What is a intake warning sound? Maybe the alarm beeping?
  10. alldodge

    2002 5.0GL-B 305 Distributor

    It all deals with width of rotor and dizzy cap electrode width. While the 10 inch diameter damper outside circumference moves maybe an inch in one revolution to get 10* of advance. The rotor being half the diameter and moving 1/2 the distance (2 revs of the crank for one dizzy) needs to move...
  11. alldodge

    2002 5.0GL-B 305 Distributor

    Module and coil under rotor
  12. alldodge

    2002 5.0GL-B 305 Distributor

    We got the sound but no vid
  13. alldodge

    Serpentine belt replacement 4.3GXI-E

    If it looks good I wouldn't replace it. Keep the spare on the boat for piece of mind.
  14. alldodge

    Trailer bearings wear out ultra quickly.

    Speedy sleeves are not going to fix this issue, you need new axles. The sleeve needs to fit tight and from the looks of the old, its slipping. In most cases you would heat up the sleeve getting it pretty hot and use oven or welding gloves to put it on
  15. alldodge

    Bravo vs Bravo Diesel Transom Assembly?

    Differences https://www.perfprotech.com/blog/articles/mercruiser-transom-assemblies Some not all diesels use a bypass fitting (like 7.3). A plug is removed from the inside of the assembly and the fitting is installed. The bellows are the same for gas and diesel
  16. alldodge

    Trailer Shocks

    Once you have all the measurements they can be looked up https://www.shockwarehouse.com/news/pdf/kyb-shock-lengths.pdf
  17. alldodge

    Prop change rpm gain?

    Slip calculator Enter info you have and then the one you want to find leave it blank and elect that button. Can also do things like what would happen if this one thing was changed https://bblades.com/propeller-slip-calculator/
  18. alldodge

    2014 3.0 mpi want go over 2500 rpm’s we have Cleaned all injectors replaced distributor and idles fine just will not go over 2500 like it’s on a rev.

    Being it never run good the drive or prop may have been swapped out with one with to much pitch or higher ratio
  19. alldodge

    1999 mercrusier EFI 5.7 fuel pump not powering on

    Need a motor serial number to verify, but most EFI motors will not sound the alarm with the key left ON. The ECM grounds the other side of the alarm if it sees and issue. The carb motors would sound because the senders would ground the other side of the alarm. Back to the problem. With key...
Top