Search results

  1. R

    1995 BW Rage14 115 Jet

    There are 2 drains / petcocks shown on the parts page for adapter and muffler.
  2. R

    1985 sea ray 250 cc fisherman

    Do a complete evaluation of this vessel.-----Might be hard to find a shop to do this " patchwork " type of repair.-------You would be shocked by what a shop would charge to do a complete gut and rebuild.
  3. R

    1972 Johnson 85 HP outboard fuel filter location.

    The cap / cover on the fuel pump should have a screen inside of it.
  4. R

    1977 Johnson 35hp neutral cut out switch question.

    Clean the internal to re-establish the ground.
  5. R

    Chrysler 9.9 flywheel removal

    Likely marks from the casting process.
  6. R

    1150 Link & Sync Question

    This started in MAY this year.----What is the concern today ???
  7. R

    1150 Link & Sync Question

    Most boats are a V at the bow.
  8. R

    1995 BW Rage14 115 Jet

    As an outboard that powerhead drains itself.-----But mounted as an inboard it and the muffler need to be drained.----Look for the plugs / valve for draining it.
  9. R

    1150 Link & Sync Question

    Looks like an easy to plane , near flat bottom to me.----And decals show the motor to be a 76 or 77 model.-----Those are distrubutor motors.
  10. R

    Chrysler 9.9 flywheel removal

    No need to use heat or PB blaster.--Use the correct puller.------Drill / tap those 3 holes and it should pop off.-----hopefully you have not damaged the coils.
  11. R

    I need a new Carburetor for mercury 9.9, 4 stroke

    Clean the carburetor.----And do not leave carburetor full of fuel when motor is not in use for a few days.
  12. R

    1150 Link & Sync Question

    How high is the transom on this boat ??
  13. R

    1995 BW Rage14 115 Jet

    Maybe it was not winterized properly.----Have you done a compression test on it ?----I would and post your numbers here.
  14. R

    1977 Johnson 35hp neutral cut out switch question.

    Same switch type was used from about 1960 to 2005.-----Black ones come apart easy.----White ones may need rivet on bottom drilled off
  15. R

    Chrysler 75 horsepower seems to lack a lot of power at wot

    What are the cylinder compression values ?----And do you have spark on 3 leads that jumps a gap of 3/8" or more?-----Flywheel key checked ?
  16. R

    Fitting Solas Prop to '65 Fastwin 18

    Prop shaft diameter on a 1963 model 10 HP is 0.554"-----The 18 HP is 0.625" on a 1965 model.
  17. R

    1977 Johnson 35hp neutral cut out switch question.

    Guess I will take one of more than a dozen apart tomorrow !
  18. R

    1977 Johnson 35hp neutral cut out switch question.

    What happens when you bend those tabs back ??
  19. R

    1977 Johnson 35hp neutral cut out switch question.

    Well-----It looks just like the ones I take apart.----So look at it very closely !!
Top