Search results

  1. R

    8hp Evinrude running poorly.

    I am surprised at the condition of these parts.----So just a quick hone and reassemble.-----Then more trouble shooting.---Sorry I can not be of more help.
  2. R

    EVINRUDE lower unit i.d.

    A V-6 some where in the 1990's or newer
  3. R

    Fogging oil won't kill engine

    If engine is in good shape , strong spark, good compression it won't stall with a bit of fogging oil introduced.
  4. R

    EVINRUDE 25 hp lower unit

    A lot depends on the location.------In salt water areas they have all been scrapped.------In some locations you find an old time shop that will work on these motors.----Keeps folks going and no used ones to be had.
  5. R

    EVINRUDE 25 hp lower unit

    your location ?
  6. R

    EVINRUDE 25 hp lower unit

    The 28 HP models from around the late 1980 to 1996 also used that lower unit.
  7. R

    1995 BW Rage14 115 Jet

    What trouble shooting was done on this engine ?----Compression test would be easy before lifting it out.-------I took one out on my own boat.-----Correct the 3 bolts / studs and nuts hold it in there.----The engine , adapter and muffler lift out as an assembly.
  8. R

    Caprice Shudder at Hwy Speed

    year ?
  9. R

    Chrysler 75 horsepower seems to lack a lot of power at wot

    There are 3 separate crankcases.-----If a piston is at the bottom of the stroke the intake ports and exhaust ports would be open.----And air would simply go out the exhaust at the prop
  10. R

    8hp Evinrude running poorly.

    Pictures of piston skirts will tell the story I think.
  11. R

    8hp Evinrude running poorly.

    Sorry----You are too far away.----Have a 91 model that was given to me.----Bad compression on one cylinder.----I have O/S piston and rings ( listed as NLA ) on hand.----Easy fix for me.
  12. R

    8hp Evinrude running poorly.

    I usually test stuff and rarely install parts by the guessing method.----When I see the score marks like in your video, the motor comes apart for inspection.-----No hesitation on that.-----I hope to pick up a 1994 long shaft model 8 HP for less than 1/2 of what you have invested.---Not run for...
  13. R

    1995 BW Rage14 115 Jet

    Step #1 would be to remove some panels to get room to work on it.
  14. R

    8hp Evinrude running poorly.

    Nothing goes wrong with these carburetors that would warrant a complete replacement.----No demand therefor no one is going to set up to make these !!!
  15. R

    Heating Johnson

    ???----And what are the " diverter valves " and what do these diverters actually do ?
  16. R

    Transom Corner Caps

    I would make replacements using fiberglass.
  17. R

    OMC ECM Needed

    One of the issues with modern electronic stuff.-----Nobody want to fix / support these items or make after market replacements !!------Old equipment that needs a bit of attention now and then is sometimes better.
  18. R

    Medically dependent on electricity?

    You would think that some of these medical appliances / systems ( not all of course ) could have a manual back up.------Let one of kids the operate the crank as needed.
  19. R

    Chrysler 75 horsepower seems to lack a lot of power at wot

    How did you pressure test the 3 crankcases ???
  20. R

    1977 Johnson 35hp neutral cut out switch question.

    ???-----These only have ONE WIRE.-----They only need 1 wire.------The ground is internal.-----I have cleaned the internal parts.-----Easy to take apart and clean.
Top